54
C
3: C
HAPTER
ONFIGURING THE
Restoring a
Configuration
B
RIDGE
Device name
■
Device location
■
IP address settings
■
Access control list
■
Basic configuration, on the other hand, includes the same set of
information, except the IP address settings.
3 Click the backup method that you want to use. Available options include
FTP, TFTP, and HTTP.
If you clicked FTP, you need to provide the following information:
■
FTP Server IP Address – IP address of the FTP server to which the
■
backup file will be saved
User name and password – Your logon information to the FTP
■
server. This account must have write permission to the server.
Path – File path on the FTP server to which to save the backup
■
File Name – File name that you want to assign to the backup
■
If you clicked TFTP, you need to provide the following information:
■
File Name – File name that you want to assign to the backup
■
TFTP Server IP Address – IP address of the TFTP server to which the
■
backup file will be saved. Before backing up via TFTP, verify that the
TFTP service on the target server is running.
If you clicked HTTP, you do not need to provide additional information.
■
When you click Backup Now, a File Download/Save As dialog box will
appear. Specify a location on your local computer where you want to
save the backup, and then click Save.
4 Click Backup Now.
If you previously saved a copy of the configuration file, you can restore
the Bridge settings in this configuration file by uploading this to the
Bridge.
CAUTION: Restoring a previously saved configuration file will override
some of your current settings.