Using The Access Control List - 3Com WL-560 User Manual

Hide thumbs Also See for WL-560:
Table of Contents

Advertisement

44
C
3: C
HAPTER
ONFIGURING THE
Using the Access
Control List
B
RIDGE
Table 14 SNMP Settings (continued)
Trap Destination
IP Address
Trap Destination
Community Name
Under System Configuration, click Access Control List. The Access Control
List page appears where you can allow or prohibit access to the wireless
network from Ethernet clients.
Follow these steps to build the Access Control List:
1 Under System Configuration, click Access Control List.
2 On the Access Control List page, click Add.
The Access Control List New ACL page appears.
3 On the New ACL page, enter the MAC address of the client you want to
add to the Access Control List, select the permission type, and click the
Add button to substantially add it.
4 Repeat steps 2 and 3 for each client.
5 Select the System Default Mode:
Allow—allows the client to access the Bridge.
Deny—prohibits the client from accessing the Bridge.
CAUTION: With the Allow option of the System Default Mode selected,
the Bridge allows all Ethernet frames except those carrying the
MAC addresses that are specified in the Access Control List and have the
permission type Deny. Similarly, with the Deny option of the System
Default Mode selected, the Bridge denies all Ethernet frames except
those carrying the MAC addresses that are specified in the Access Control
List and have the permission type Allow.
Make sure that the MAC address of the computer through which you are
configuring the Bridge is not specified in the Access Control List with the
permission type Deny if you want to set the access control type to Allow.
If you want to set the Access Control Type to Deny, make sure that the
MAC address of the computer is included in the Access Control List with
the permission type Allow. Failure to do so results in access to the Bridge
being blocked; the Bridge will no longer be configurable through the
computer.
Enter the IP address of the trap manager that will receive
these messages.
Enter the community name of the trap manager that will
receive these messages.

Advertisement

Table of Contents
loading

Table of Contents