CAME STYLO ME Installation Manual page 15

Securing the transmission arm
STYLO-BS
UNI 5739 Ø 10x14
Assemble the hinged arm by joining the two half-arms

with nuts and bolts. Lubricate the rotation pins .
Ø 10x39
Insert the hinged arm onto the gearmotor shaft and

secure it using the screw and washer .
O-Ring 4100
Release the gearmotor, open the gate leaf and hook

the arm using the nuts and bolts .

Cover the hole using the cap .
UNI 6592
Ø 12x24
UNI 6593 Ø 6x18
UNI 5739 Ø 6x10
UNI 6593
UNI 5739
Ø 6x18
M6x10
The data and information provided in this manual are subject to change at any time without prior notice.