Installation - CAME STYLO ME Installation Manual

Installation

The following illustrations are only examples, given that the space for securing the operator and accessories varies
depending on the overall dimensions. The installation technician is responsible for choosing the most suitable solution.
Preparation
Set up corrugated tubes for the connections coming from the junction box.
N.B. the number of tubes depends on the type of system installed and any accessories.
Securing the brackets
STYLO-BS
Trace all axes and
dimensions, respecting
the levels shown in the

drawing , drill the

marked points , then
secure the gearmotor
anchoring bracket to the
wall or post as well as the
arm mounting bracket to

the gate .
Note: the illustrations are
mere examples, it is up
to the install to choose
the most suitable solution
depending on gate leaf type
and thickness.
The data and information provided in this manual are subject to change at any time without prior notice.
56
4 x ø 8,5
80
STYLO-BS
2 x ø 6,5
60
100