AZTECH
WIPC403 IP CAMERA USER MANUAL v1.0
7.4.4 Maintain Settings
In this page, user can restore the IP Camera in its default settings, power reboot the
camera and upgrade its System Firmware and Web UI Firmware.
Reboot button to restart the equipment, if you have set the pre-position, and it will turn
this position. This will take less than five minutes to do the reboot.
Click "Factory Default" button, equipment will restart and get back to all the default
settings.
"Restore" part, select the setting file you have saved, click OK, it will recover all the
settings.
"Upgrade" part, select the firmware file for upgrading, click OK, and you are able to
upgrade the equipment. After the upgrading, equipment will restart. Upgrading takes a
little time, please wait patiently. If upgrading is finished, it will show you a message to
remind you.
7.4.5 Back Tab
This tab takes you back to the Viewing Page.
8 Advanced Application
8.1 Android and iPhone Mobile Application Set Up
The following are Step–by– Step Procedure for Android / iPhone App Set Up:
1) Download and Install
You may Scan the QR Code found at the Packaging Box to automatically search for
the APK/APP.
2) Click Add Camera
Figure 28
'Aztech IP Cam'
App at Google Play Store or iTunes/AppStore.
25