Aztech WIPC411FHD Easy Start Manual

EASY START GUIDE
This Easy Start Guide will help you setup your Aztech WIPC411FHD IP Camera to connect to your network for the first time. Before you
continue with the installation, ensure that your modem's Internet connection is UP. This Easy Start Guide together with the User Manual
which provides a more advanced guide to this product, can be downloaded from our Aztech Support Website (www.aztech.com/support).
A

PACKAGE CONTENTS

The following items below are included in your WIPC411FHD package.
WIPC411FHD Ethernet
Cable
Mounting Easy Start
Bracket
Guide
B DEVICE OVERVIEW
FOR ANDROID USERS
3A
1
1
2
2
4
3
3
5
4
5
Power Wireless
Adapter Antenna
User Warranty
Manual Policy
Wireless Antenna
Photo Resistance
Infrared LEDs
Lens
Built-in Speaker
BACK PANEL
Micro SD Card Slot
External Mic
LAN Port
External Speaker
PAGE 1
Download and Install the Aztech IP Cam App 2 on
Google Play. You may also scan the QR Code found
on the packaging box to automatically search for the
application.
Launch the Aztech IP Cam App 2 then tap the
button to begin adding a camera.
On the next page, tap the
Add manually button at the
bottom of the screen.
You may use the Scan button to scan the UID found
at the bottom label of the camera, Search to scan
for connected camera(s), or manually enter the
information needed.
NOTE: This 20-digit information is found at the
bottom label of your Camera. The UID is unique for
every device.
*(Sample QR Code Only)
Enter your camera's Security Code (password).
NOTE: The default Security Code for all Cameras is
admin.
Enter the camera's Name. (e.g. Cherry's Camera)
then press OK to apply changes.
You may now start viewing your WIPC411FHD's
monitored area.
PAGE 3
WIPC411FHD
Full HD Wireless IP Camera
C

INSTALLATION STEPS

4
Tablets / Smartphones
STEP 1
Connect your Aztech WIPC411FHD to your router's Ethernet LAN port using
an Ethernet cable.
NOTE: Ensure that your router's internet connection is UP, for you to access
your WIPC411FHD via the Internet.
STEP 2
Connect the power adapter to your WIPC411FHD camera and plug it into a
power outlet to switch it ON.
STEP 3
Built-in Mic
3. 1 Connect your router to your computer's Ethernet LAN port using an
Ethernet cable.
WPS Button
3. 2 Connect the power adapter to your router, plug it into a power outlet
and turn it ON.
DC Jack
STEP 4
You can either set it up using your mobile phone or your Computer / Laptop.
If you are using a mobile phone, it is recommended to connect over the same
Local Area Network where your WIPC411FHD is connected.
• For Android Users, please go to 3A (see Page 3).
• For Apple Users, please go to 3B (see on Page 5).
• For Desktop / PC Users, please go to 3C (see Page 6).
Connecting your Camera to your Wi-Fi
A. Using the Aztech IP Cam App 2
1 2
3 4
5
6
7
with Pan and Tilt
Power Outlet
1
2
WIPC411FHD
3.1
Computer / Desktop
To connect your camera via Wireless Settings simply follow
the instructions below:
1 Select your WIPC411FHD Camera by tapping the
beside the camera that you wish to connect to your
wireless network.
2
Tap the Edit Camera icon
On the Edit Camera > Advanced Setting section, tap the
3
Advanced button. Wait for the app to finish retrieving
all wireless networks within range.
After retrieving the Wireless Networks, tap on the
4
Manage Wi-fi Networks button. A dropdown selection
list would appear.
On the dropdown selection list, tap on the dropdown
5
arrow and select an SSID (wireless network name).
NOTE: For a more detailed guide of the WIPC411FHD
IP Camera, you may refer to the User Manual.
After selecting the correct SSID, enter the wireless
6
network's password then press OK. Wait for the
camera to successfully connect with your router.
After the Camera successfully connects with your
7
router, simply tap the OK button to finish the setup. The
Advanced Setting > SSID area would indicate the SSID
(in this case Aztech7008-8AFB) you are connected to
with a Connected status.
Power Outlet
3.2
Router
PAGE 2
...
.
PAGE 4