AZTECH
WIPC403 IP CAMERA USER MANUAL v1.0
7.2 Network Configuration Page
7.2.1 Basic Network Setting
Figure 16
This page allows the user to configure the camera's IP Address. It may either be DHCP or
Static Configuration. Also, user can define the camera's HTTP Port Number. By default the
camera's port number is 8081.
7.2.2 Wireless LAN Setting
Figure 17
The wireless setting page is showed as below Figure 17, user can click the "Scan" button,
and it will show you the WIFI network it has detected. Please select one, and the network
18