Multi Device Monitor System - Aztech wipc403 User Manual

AZTECH WIPC403 IP CAMERA USER MANUAL v1.0
3) Enter the UID. This information is found at the bottom label of the Camera. You may
scan the UID's QR Code or Search the Camera from the Local Area Network. The
UID is unique for every device.
4) Enter the Security Code/Password. The Default Password is admin. Then Click
OK/Save to view the Camera.
5) You may also edit the Camera's Settings, Click 'Edit Camera', then go to the
'Advanced Setting' to change the Security Code, Video Setting and WiFi Setting.
6) It is highly recommended to change the Security Code during Initial Set Up. Click on
'Modify Security Code' Type the Old Password then Enter the New Password.
7) To connect your camera via Wireless Setting, Click on Wifi Setting then go to
'Manage Wifi Networks'
8) You may select on which Wireless Network to connect then key-in its Password.
9) After successful connection, you may now disconnect the LAN Cable from your
camera and do a Power reboot on the device.
(For screenshot details please refer to Easy Start Guide copy included in the
Package, Please note that Maximum of eight (8) IP Cameras can be added in the
Mobile App)
8.2 Other Web Browser
Except IE browser, you can visit the camera by Firefox, Safari, Chrome, Opera browser etc.,
please select "Mode 2 to view".

8.3 Multi Device Monitor System

Multi Device Monitor System is a free software offered, several devices on LAN and WAN
can be browsed at the same time. The software also support snap, video record and so on.
The below Figure 29 is the interface.
26