How To Log On To The Wireless Router After Configuration Settings Have Been Applied - NETGEAR Wireless Router Setup Manual

NETGEAR Wireless Router Setup Manual
How to Log On to the Wireless Router After
Configuration Settings Have Been Applied
Connect to the wireless router by typing http://www.routerlogin.net in the address field of
1.
your browser, then click Enter.
Figure 3-7: Login address
For security reasons, the router has its own user name and password. When prompted, enter
2.
admin for the router user name and
letters. To change the password, see
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
Figure 3-8: Login window
Once you have entered your user name and password, your Web browser should find the
wireless router and display the home page as shown in below.
The browser will then display the settings home page.
When the wireless router is connected to the Internet you can use the following links in the settings
home page to view up to date support or documentation on the NETGEAR Web site:
• Click the Knowledge Base link under the Web Support menu to view support information for
this router.
• Click the Documentation link under the Web Support menu to view the documentation for this
router.
If you do not click Logout, the wireless router will wait 5 minutes after there is no activity before it
automatically logs you out.
3-10
password for the router password, both in lower case
"Changing the Administrator Password" on page
Connecting the Router to the Internet
August 2004
5-1.