NETGEAR WAB102 User Manual page 9

User's Guide for the WAB102 802.11a+b Dual Band Wireless Access Point
WAB102 Wireless Access Point Front Panel
The WAB102 Dual Band Wireless Access Point provides these status LEDs.
The following table explains the LED indicators:
LED
Power
Off No power. If this LED does not come on with the power adapter and
cord correctly installed, see Chapter 4, Troubleshooting.
On Power is on.
Blink Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going on steady.
Ethernet Link/Activity
Off Indicates no Ethernet link detected.
Green On 100Mbps Fast Ethernet link detected, no activity
Green Blink Indicates data traffic on the 100Mbps LAN
Amber On 10Mbps Ethernet Link detected but no activity.
Amber Blink Indicates data traffic on the 10Mbps LAN
802.11a WLAN Link/Activity
Off No wireless link.
Slow Blink Associated with network but no activity.
Fast Blink Indicates the WAB102 802.11a wireless data transmission.
802.11b WLAN Link/Activity
Off No wireless link.
Slow Blink Associated with network but no activity
Fast Blink Indicates the WAB102 is 802.11b wireless data transmission.
6
Power
Ethernet
DESCRIPTION
802.11a 802.11b
WLAN WLAN
Introduction