NETGEAR WAB102 User Manual page 39

User's Guide for the WAB102 802.11a+b Dual Band Wireless Access Point
• Authentication
The authentication setting, "Open System" or "Shared Key," is unrelated
to encryption of transmissions. The two bands may have use different
authentication settings. Choose "Shared Key" for more security.
802.11a SSID, circle one: Open System or Shared Key
802.11b SSID: circle one: Open System or Shared Key
Note: If you select shared key, the other devices in the network will not
connect unless they are set to Shared Key as well.
• WEP Encryption
802.11a and 802.11b differ in their use of WEP encryption keys. See
"Security Configuration" on page 21
differences.
802.11a WEP Encryption Keys:
Key 1: _____________________ Circle Key Size: 64 or 128 or 152 bits
Key 2: _____________________ Circle Key Size: 64 or 128 or 152 bits
Key 3: _____________________ Circle Key Size: 64 or 128 or 152 bits
Key 4: _____________________ Circle Key Size: 64 or 128 or 152 bits
802.11b WEP Encryption Keys:
For all four 802.11b keys, choose the Key Size. Circle one: 64 or 128 bits
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
Use the procedures described in the following sections to configure the
2.
WAB102.
Store this information in a safe place.
3.
36
for a description of these
Protecting Your Wireless Network