Troubleshooting; Basic Functioning - NETGEAR WAB102 User Manual

802.11a+b dual band wireless access point
Hide thumbs Also See for WAB102:
Table of Contents

Advertisement

This chapter gives information about troubleshooting your WAB102 802.11 a+b
Dual Band Wireless Access Point. After each problem description, instructions
are provided to help you diagnose and solve the problem. For the common
problems listed, go to the section indicated.
Is the wireless access point on?
Have I connected the wireless access point correctly?
Go to
"Install the WAB102 Wireless Access Point" on page
I can't remember the wireless access point's configuration password.
Go to
"Change the Password" on page
Note: For up-to-date WAB102 installation details and troubleshooting
guidance visit www.netgear.com.

Basic Functioning

If you have trouble setting up your WAB102, check the tips below.
No lights are lit on the access point
It takes a few seconds for the power light to be lit. Wait a minute and check
the power light status on the access point.
The access point has no power.
Make sure the power cord is connected to the access point.

Troubleshooting

Chapter 4
Troubleshooting
35.
10.
41

Advertisement

Table of Contents
loading

Table of Contents