Table of Contents
Advertisement
User's Guide for the WAB102 802.11a+b Dual Band Wireless Access Point
802.11a Advanced Wireless LAN Configuration Parameters
CONFIGURATION
Transmit Power
Beacon Interval
RTS Threshold
Fragmentation Length
28
Transmit signal strength of the WAB102. The
options are 100%, 50%, 25%, 12.5% and
Lowest. Decreases the transmit power if more
than one AP is co-located using the same
channel frequency.
Default:100%
Specifies the Beacon Interval value. Enter a
value in between 20 to 1000.
Default: 100
The packet size that the wireless node uses to
determine if it should use the CSMA/CD
mechanism or the CSMA/CA mechanism for
packet transmission. With the CSMA/CD
transmission mechanism, the transmitting
station sends out the actual packet as soon as it
has waited for the silence period. With the
CSMA/CA transmission mechanism, the
transmitting station sends out an RTS packet to
the receiving station, and waits for the receiving
station to send back a CTS packet before
sending the actual packet data.
Default: 2346
This is the maximum packet size used for
fragmentation. Packets larger than the size
programmed in this field will be fragmented.
The Fragment Threshold value must be larger
than the RTS Threshold value.
Default: 2346
DTIM
The Delivery Traffic Indication Message.
Specifies the data beacon rate between 1 and
255.
Default: 1
Setting Up Basic Wireless Connectivity
DESCRIPTION
Advertisement
Table of Contents
