Configuring Dial-In On The Serial Port - NETGEAR FR328S Cable/DSL ProSafe Firewall FR328S FR328S Reference Manual

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
Figure 4-2: Auto-Rollover configuration menu
Configure the Auto-Rollover settings.
3.
Click Apply for the changes to take effect.
4.

Configuring Dial-in on the Serial Port

Dial-in lets a single remote computer connect to the FR328S through the serial port to gain access
to LAN resources or a remote access server.
Be sure you have prepared the basic requirements listed below, then follow the 'how to' procedure.
4-4
M-10207-01, Reference Manual v2
Serial Port Configuration