NETGEAR FR328S Cable/DSL ProSafe Firewall FR328S FR328S Reference Manual page 25

Connect the Ethernet cable (A) from your Cable or DSL modem to the FR328S's Internet
c.
port.
Figure 3-2: Connect the Cable or DSL Modem to the firewall
Connect the Ethernet cable (B) which came with the firewall from a Local port on the
d.
router to your computer.
Figure 3-3: Connect the computers on your network to the firewall
Note: The FR328S Firewall incorporates Auto Uplink
port will automatically sense whether the cable plugged into the port should have a 'normal'
connection (e.g. connecting to a PC) or an 'uplink' connection (e.g. connecting to a switch or
hub). That port will then configure itself to the correct configuration. This feature also
eliminates the need to worry about crossover cables, as Auto Uplink will accommodate either
type of cable to make the right connection.
Connecting the Firewall to the Internet
FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
LO CA L
1 0 / 1 0 0 M
M O DEM
8 7 6 5 4
B
LO CA L
1 0 / 1 0 0 M
M O DEM
8 7 6 5 4 3 2 1
M-10207-01, Reference Manual v2
A
DSL
modem
1 2 V D C O . 5 A
IN TER N ET
3 2 1
DSL
A
modem
1 2 V D C O . 5 A
IN TER N ET
technology. Each LOCAL Ethernet
TM
3-5