Operations Flow; Activation Key Card - Panasonic WJ-NV300K Installation Manual

Operations flow

Obtain the license (Registration Key)
z

☞ Activation Key Card

Connection
x
Turn on the recorder
c
Register the license (Registration Key)
v
Configure the minimum settings
b
[Easy Start]
n
☞ Operating Instructions (PDF)
Start operations
☞ Page 24
☞ Page 34
☞ Page 36
☞ Page 41
Setup
z Obtain the "Registration Key" of the recorder by follow-
ing the instructions on the provided Activation Key Card.
To increase number of the connected camera, get the
additional camera registration key number described on
the Activation Key Card packaged in the Additional
Camera Kit (WJ-NVE30, WJ-NVE30W: optional).
x Connect the recorder to each device.
c Turn on the power of the recorder.
v Register the Registration Key of the recorder. If neces-
sary, register the "Registration Key" for the Additional
Camera Kit or for the Additional Business Intelligence
Kit.
Important:
• Be sure to register the "Registration Key" of the
recorder. If the "Registration key" of the recorder is not
registered, the one for the extension software cannot be
registered. A message to prompt the registration will be
displayed.
b Register the date & time and cameras on "Easy Start".
When it is not necessary to change other default set-
tings, it is possible to start operations.
n If necessary, perform the detailed settings for each func-
tion.
Note:
• Some functions are not supported depending on the
models of the connected cameras. For further informa-
tion about detailed specifications, refer to the operating
instructions of the cameras in use.
23