Operation Flow - Panasonic WJ-ND300 Network Setup Manual

Operation flow

The following settings can be configured with this software.
• Network settings of the recorder (Camera port, client PC port)
• Camera network settings of the recorder (Camera registration for each channel)
• Network settings of the cameras connected to the recorder (IP address, etc.)
Configure the network settings of the recorder/camera as follows.
Detect recorders/cameras and confirm
the current settings. (page 11)
Arrange the camera number by moving/
deleting the camera icon (pages 13 and 14)
To register the cameras
with the automatically
assigned IP addresses
(when installing newly)
Change the settings
(only for the recorder) (page 16)
Register the recorder and cameras,
and confirm the result.
(CAM IP Auto Addressing) (page 17)
Important:
• Any recording currently being performed on the recorder will stop in the processes of "CAM IP Auto Addressing"
and "Manual Registration".
• The model WV-NS202 accepts "Manual Registration" only.
Notes:
• When using multiple recorders, repeat the above procedures for each recorder.
• Do not change the network settings of the cameras and register the cameras with the automatically assigned IP
addresses when automatically assigning IP addresses to the cameras. (page 17)
To register the cameras
with the manually assigned
IP addresses
Change the settings
(for the recorder and camera) (page 16)
Register the recorder and cameras,
and confirm the result.
(Manual Registration) (page 19)
9