Major Operating Controls And Their Functions; Front View - Panasonic WJ-NV300K Installation Manual

Major operating controls and their functions

Front view

ERROR
OPERATE
COPY
MOUSE
e Copy port
* The copy port has a certain connecting direction. When it is hard to connect,
q Status indicators
ERROR: Blinks when an error that can become a prob-
lem for the recorder to run the system occurs.
Blinks red: System error
Blinks orange: Thermal error, cooling fan malfunc-
tion, etc.
OPERATE: Lights when the power is on.
HDD [HDD1]/[HDD2]: Indicates the operational status
(access/failure) of the respective hard disk drive.
Blinks green: Indicates that the respective hard disk
drive is being accessed.
Lights red: Indicates that a fault (or an error) has
occurred on a hard disk drive.
Off: Indicates that the respective hard disk drive is
not being accessed.
REC: Lights orange when recording is being performed.
ALARM: Blinks when an alarm occurs, and lights when
the alarm output stops. This indicator will go off
when the [Reset] button (☞ Operating Instructions
(PDF)) is clicked.
w Buzzer stop button [BUZZER STOP]
Press this button to stop the buzzer that started sound-
ing at an alarm/error occurrence. Refer to the Operating
Instructions (PDF) for further information about alarms
and errors.
e Copy port [COPY]
Connect an external storage device (external Hard disk
drive, USB memory) to this port and copy images and
audio recorded on the hard disk drive.
* Mouse connection is also available.
18
q Status indicators
w Buzzer stop button
REC
ALARM
BUZZER STOP
t SDHC/SD memory card slot
r Restart button
do not forcibly connect and check the direction of the connector.
(This illustration represents WJ-NV300K.)
r Restart button [RESTART]
Press this button to reboot the recorder. When pressing
this button, use a sharp object such as a clip.
t SDHC/SD memory card slot
Recorded images and audio can be copied onto an SD
memory card inserted in this slot (☞ page 19).