Major Operating Controls And Their Functions; I Front View - Panasonic WJ-HD309 Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

I Front View

[WJ-HD316]
[WJ-HD309]
q Operate Indicator (OPERATE)
Lights up when the power is turned on.
w Alarm Suspension Indicator (ALARM SUSPEND)
Lights up when the alarm suspension mode is selected.
e Alarm Indicator (ALARM)
Blinks when an alarm occurs, and lights steadily when
the activated alarm is reset automatically.
To turn this indicator off, press the ALARM RESET but-
ton.
r Alarm Reset Button (ALARM RESET)
Pressing this button cancels alarm activation, and
returns the system to the condition before the alarm
was activated.
t Error indicator (ERROR)
Blinks orange when an error occurs that will not keep
the unit from running .
Blinks red when an error occurs that may cause the
system to go down.
y Timer Indicator (TIMER)
Lights up when the schedule recording is set, and
blinks while the schedule recording is being performed.
8
o
t
qw e r yu i !0
MONITOR1
MONITOR2
TIMER 1 2
ERROR
ALARM
SHIFT
5 6
ALARM
SUSPEND ALARM
RESET
DISK SELECT COPY
9 10/0
HDD 1
EL-ZOOM
OPERATE
13 14
HDD 2
o
t
qw e r yu i !0
MONITOR1
MONITOR2
TIMER
1 2
ERROR
ALARM
SHIFT SEQ TEXT
4 5
ALARM
SUSPEND ALARM
RESET
DISK SELECT COPY
7 8
HDD 1
EL-ZOOM
OPERATE
0
HDD 2
!8 !9 @0
!1 !5 !6 !7
STOP PLAY PAUSE REC - REC STOP
REV
3 4
PAN/ GOTO
TILT LAST SEARCH
SEQ OSD
SETUP
PAN/TILT
7 8
SLOW /ESC
ZOOM/ A-B
–
FOCUS REPEAT
TEXT MARK
11 12
IRIS LISTED
PRESET
LOGOUT
/AUTO
15 16
SET
BUSY
!2 !3 !4 @1 @2 @3
!8 !9 @0
!1 !5 !6 !7
STOP PLAY PAUSE REC - REC STOP
REV
3
PAN/ GOTO
TILT LAST
SEARCH
OSD
SETUP
PAN/TILT
6
ZOOM/ A-B SLOW /ESC
–
FOCUS REPEAT
MARK
9
IRIS LISTED
LOGOUT PRESET
/AUTO
SET
BUSY
!3 !4 @1 @2 @3
!2
u HDD Access Indicators (HDD1/HDD2)
Blinks when the HDD1 or the HDD2 is accessed
respectively.
i Monitor Switch button (MONITOR1/MONITOR2)
Pressing this button switches the monitor. This button
lights up when monitor 1 is selected, and goes off when
monitor 2 or the VGA monitor is selected.
o Shift Button (SHIFT)
Toggles the functions of the camera selection buttons.
!0 Camera Selection Buttons ([1] - [10/0], [11] - [16] for
the WJ-HD316, [1] - [9], [0] for the WJ-HD309)
Pressing a button displays live or playback images of
the selected camera. The LED in the button indicates
the status as follows.
Green: When a button is lit green, the currently dis-
played image on the monitor is live from a respec-
tive camera.
Orange: When a button is lit orange, the image from a
respective camera is recorded.
Blue: When a button is lit blue, the currently displayed
image on the monitor is live from a respective cam-
era and is also recorded.
@6
PULL
FWD
+
Digital Disk Recorder
WJ-HD
@4 @5
@6
PULL
FWD
+
Digital Disk Recorder
WJ-HD
@4 @5
@7 @8 @9
S-VIDEO
COPY 2 VIDEO
OUT
AUDIO
OUT
#0
@7 @8 @9
S-VIDEO
COPY 2 VIDEO
OUT
AUDIO
OUT
#0