The Front Panel - NETGEAR CA 95054 Setup Manual

NETGEAR Router Setup Manual

The Front Panel

The front panel of the router includes these status lights.
Figure 2-1: router Front Panel
You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Label Activity
Power On Green Solid
Off
Test Blinking
Off
Internet On
Blink
LAN On (Green)
Blink (Green)
On (Yellow)
Blink (Yellow)
Off
2-2
Description
Power is supplied to the router.
Power is not supplied to the router.
The router is performing its diagnostic test.
The router successfully completed its diagnostic test.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
The LAN (local area network) port has detected link with a 100 Mbps
device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
Getting to Know Your NETGEAR Wireless Router
August 2004