Overview Of How To Access The Wireless Router - NETGEAR CA 95054 Setup Manual

NETGEAR Router Setup Manual
Overview of How to Access the Router
The table below describes how you access the router, depending on the state of the router.
Table 3-1. Ways to access the router
Router State Access Options
Factory Default Automatic Access via
the Smart Wizard
router is
Note: The Configuration
supplied in the
Assistant
factory default
state. Also, t
he
factory default state
is restored when you
Manually enter a URL
use the factory reset
to bypass the Smart
button. See
Wizard Configuration
"Restoring the
Assistant
Default
Configuration and
Password" on page
7-7 for more
information on this
feature.
Configuration Enter the standard
Settings Have URL to access the
router
Been Applied
Enter the IP address
of the
access the
configuration utility
3-8
Description
Any time a browser is opened on any computer connected to
router
the
browser and display the Configuration Assistant
welcome page.
There is no need to enter the
or provide the
You can bypass the Smart Wizard Configuration Assistant
feature by typing
http://www.routerlogin.net/basicsetting.htm
in the browser address bar and clicking Enter. You will not be
prompted for a user name or password.
This will enable you to manually configure the router even
when it is in the factory default state. When manually
configuring the router, you must complete the configuration
by clicking Apply when finished entering your settings. If you
do not do so, a browser on any computer connected to the
router will automatically display the router's Configuration
Assistant Welcome page rather than the browser's home
page.
Connect to the router by typing either of these URLs in the
address field of your browser, then click Enter:
http://www.routerlogin.net
•
http://www.routerlogin.com
•
The router will prompt you to enter the user name of admin
and the password. The default password is password.
Connect to the router by typing the IP address of the router in
router
to the address field of your browser, then click Enter.
192.168.0.1 is the default IP address of the router. The router
will prompt you to enter the user name of admin and the
password. The default password is password.
August 2004
router will automatically connect to that
, the
router URL in the browser,
login user name and password.
Connecting the Router to the Internet