NETGEAR CA 95054 Setup Manual page 14

NETGEAR Router Setup Manual
Locate the Ethernet cable (Cable 1 in the diagram) that connects your PC to the modem.
c.
Figure 3-1: Disconnect the Ethernet cable from the computer
Disconnect the cable at the computer end only, point A in the diagram above.
d.
Look at the label on the bottom of the router. Locate the Internet port. Securely insert the
e.
Ethernet cable from your modem (Cable 1 in the diagram below) into the Internet port of
the router as shown in point B of the diagram below.
B
Figure 3-2: Connect the router to the modem
3-2
A
August 2004
Connecting the Router to the Internet