Front Panel With Leds - NETGEAR BR200 Hardware Installation Manual

Front panel with LEDs

The following figure shows the front panel of the model BR200.
Figure 1. Front panel model BR200
The following table describes the LEDs.
Table 1. LEDs on the front panel
LED Description
Power LED Solid green. The router is powered on.
Blinking green. The router is booting or shutting down.
Solid amber. The router did not boot successfully.
Blinking amber. A firmware update is in progress.
Off. Power is not supplied to the router.
WAN LED Solid green. The router established an Internet connection but is not processing Internet
traffic.
Blinking green. The router established an Internet connection and is transmitting or
receiving packets.
Solid amber. The router attempted but failed to establish an Internet connection.
Blinking amber. The router is in the process of establishing an Internet connection.
Off. No cable is not connected to the Internet port or the cable is not connected to an
Internet modem.
Cloud Connection LED Solid blue. The router is connected to the cloud server and is set up to be managed by
NETGEAR Insight.
Off. The router is not connected to the cloud server or is set up to be managed by the
local browser UI.
VPN LED Currently not in use
LAN LEDs Solid green. A valid 1 Gbps link is established.
Link, speed, and Blinking green. The port is transmitting or receiving packets at 1 Gbps.
activity for Ethernet Solid amber. A valid 10 Mbps or 100 Mbps link is established.
ports 1 to 4 Blinking amber. The port is transmitting or receiving packets at 10 Mbps or 100 Mbps.
Off. No link is established.
Rightmost LED Currently not in use
Hardware Overview
Insight Managed Business Router BR200
11 Hardware Installation Guide