Table of Contents
Advertisement
Networks: Set the RIPng-enabled interfaces by network using IPv6 addresses. RIPng is enabled on the interfaces that have addresses within the network range.
Routes: Set RIPng static routing announcement of specified network address.
Redistribute Routes: Redistribute routes of the specified protocol or kind into RIPng, with the metric type and metric set if specified, filtering the routes using the given
route-map if specified.
Type: The type is the source of the route. Select from: Main, Connected, Static, OSPF, BGP.
Metric: RIPng metric is a value for distance for the network. Usually the RIP service increments the metric when the network information is received. The metric for
redistributed routes is set to 1.
Route Map: Route maps provide a means to filter and/or apply actions to routes, allowing policies to be applied to routes.
Route Maps and Filters
Access Lists
This option provides for basic filtering based on IP addresses and netmasks.
Click Add to create a filtering rule.
10/13/2014
CradlePoint COR IBR1100/IBR1150 – Manual
64
Advertisement
Table of Contents
