Openvpn Tunnels - Cradlepoint COR IBR1100/IBR1150 Manual

Enabled: Enable or disable the interface.
Name: Give the interface a unique name that matches the mGRE (multipoint GRE) tunnel. Select from configured GRE tunnels or input manually.
Peer Authentication: Embeds the secret plaintext password to outgoing NHRP packets. Incoming NHRP packets on this interface are discarded unless this
password is present. Max length: 8 characters.
Holding Time: Specifies the holding time for NHRP registration requests and resolution replies.
Shortcut-Destination: Reply with authoritative answers on NHRP resolution requests destined to addresses in this interface (instead of forwarding the packets).
Non-Caching: Disables caching of peer information from forwarded NHRP resolution reply packets.
Shortcut: Enable creation of shortcut routes.
Redirect: Enable sending of proprietary enterprise-style NHRP traffic indication packets.
You also have the option to create static mappings for this interface. Click Add in the table to open the static mapping editor.
Protocol Address: Mapped endpoint to from protocol address to NBMA address.
Protocol Prefix: Optional prefix for protocol address.
NBMA Address: Destination mapped address from protocol address/prefix.
Register: This optional parameter specifies that a Registration Request should be sent to this peer on startup (displays flag R in the static mapping table if
selected).
Proprietary OS: This should be enabled if the statically mapped peer is running proprietary OS (displays flag C in the static mapping table if selected).

OpenVPN Tunnels

NOTE: OpenVPN requires a feature license. Go to System Settings → Feature Licenses to enable this feature.
OpenVPN is an open source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in
routed or bridged configurations and remote access facilities.
10/13/2014
CradlePoint COR IBR1100/IBR1150 – Manual
116