1. Manuals
  2. Brands
  3. Cradlepoint Manuals
  4. Network Accessory
  5. COR IBR1100/IBR1150
  6. Manual

Cradlepoint COR IBR1100/IBR1150 Manual

Highly available, cloud-managed networking for extreme conditions
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CradlePoint COR IBR1100/IBR1150 – Manual
Highly Available, Cloud-Managed Networking for Extreme Conditions
The CradlePoint COR IBR1100 Series is a compact, ruggedized 3G/4G/LTE networking solution designed for mission critical connectivity in the most challenging
environments.
Ideal for in-vehicle networks including police cars, ambulances, and mass transit, this cloud-managed solution provides organizations the ability to scale deployments quickly
and manage their vehicle networks easily in real-time.
With an extensive list of safety and hardening certifications, the COR IBR1100 is engineered to protect against extreme temperatures, humidity, shocks, vibrations, dust, water
splash, reverse polarity and transient voltage.

Key Features

Cloud-managed for zero-touch deployment and intelligent management
Internal 3G/4G modem with secured SIM card access and dual SIM slots
LTE support for all major U.S. carriers and Europe/international operators (failover to HSPA+ or EVDO)
Software-defined radio supports multiple carriers (Gobi)
WiFi (IBR1100) and non-WiFi versions (IBR1150) available: IBR1100 includes dual-band dual-concurrent 2.4/5 GHz 802.11 a/b/g/n/ac WiFi; 2 x 2 MIMO with two
external dual-band antenna connectors
Ignition sensing
Ruggedized: protects against vibration, shock, dust, splash, & humidity
Built-in transient and reverse polarity voltage protection; 9–36 DC voltage input range
10/13/2014
CradlePoint COR IBR1100/IBR1150 – Manual
1

Advertisement

Table of Contents
loading

Related Manuals for Cradlepoint COR IBR1100/IBR1150

Summary of Contents for Cradlepoint COR IBR1100/IBR1150

  • Page 1: Key Features

    CradlePoint COR IBR1100/IBR1150 – Manual Highly Available, Cloud-Managed Networking for Extreme Conditions The CradlePoint COR IBR1100 Series is a compact, ruggedized 3G/4G/LTE networking solution designed for mission critical connectivity in the most challenging environments. Ideal for in-vehicle networks including police cars, ambulances, and mass transit, this cloud-managed solution provides organizations the ability to scale deployments quickly and manage their vehicle networks easily in real-time.

  • Page 2: Administration Pages

    First Time Setup Wizard Using Enterprise Cloud Manager Administration Pages The COR IBR1100/IBR1150 administration pages include the following five tabs: Navigating the Administration Pages for helpful information about how to use the device's GUI-based management interface. NOTE: The manual content for the following administration pages sections is generic across multiple devices. Therefore, some details may not apply to the COR IBR1100 or COR IBR1150 because they are specific to another device.
  • Page 3 CradlePoint COR IBR1100/IBR1150 – Manual VPN Tunnels WiPipe QoS Network Settings Content Filtering DHCP Server Firewall MAC Filter / Logging Routing Routing Protocols WiFi / Local Networks WiPipe QoS Internet Connection Manager Client Data Usage Data Usage GRE Tunnels L2TP Tunnels...

  • Page 4: Package Contents

    Two meter locking power and GPIO cable (direct wire) Quick Start Guide with warranty information NOTE: Due to the diverse needs of customers, the COR IBR1100/IBR1150 package does not include a power adapter or antennas. See the Accessories section below for several power and antenna options.

  • Page 5: Feature Details

    CradlePoint COR IBR1100/IBR1150 – Manual For 9–24 VDC installations, use a 3 A fuse For > 24 VDC installations, use a 2.5 A fuse Reverse polarity and transient voltage protection per ISO 7637-2 Ignition sensing (automatic ON and time-delay OFF) Power consumption: idle: typical=400mA@12VDC (4.8W);...
  • Page 6 Power Wall options COR IBR1100/IBR1150 extended temperature (−30 °C to 70 °C) 12VDC 2A locking power adapter – requires separate line cord (Part # 170648-000) Line cord for North America (Part # 170623-001) Line cord for EU (Part # 170623-002) Line cord for UK (Part # 170623-003) COR 12VDC 2A locking power adapter with 0 °C to 40 °C temperature range –...

  • Page 7: Business-Grade Modem Specifications

    CradlePoint COR IBR1100/IBR1150 – Manual Business-Grade Modem Specifications COR IBR1100/IBR1150 models include an integrated 4G LTE modem – specific model names include a specific modem (e.g., the COR IBR1100LPE-VZ includes a Verizon LTE modem). Please note that LPE models are flexible and support bands for multiple cellular providers; however, only the frequency bands in bold below are supported by the listed provider.
  • Page 8 CradlePoint COR IBR1100/IBR1150 – Manual COR IBR1100LP3-EU, COR IBR1150LP3-EU – 4G LTE/HSPA+ for Europe Technology: LTE, HSPA+ Downlink Rates: LTE 100 Mbps, HSPA+ 21.1 Mbps (theoretical) Uplink Rates: LTE 50 Mbps, HSPA+ 5.76 Mbps (theoretical) Frequency Bands: LTE Band 1 (2100 MHz), Band 3 (1800 MHz), Band 7 (2600 MHz), Band 8 (900 MHz), Band 20 (800 MHz)
  • Page 9 CradlePoint COR IBR1100/IBR1150 – Manual Ports & LEDs 10/13/2014...
  • Page 10 CradlePoint COR IBR1100/IBR1150 – Manual ANTENNA CONNECTORS – There are five total antenna connectors for the IBR1100 and three for the IBR1150: Two for the integrated 3G/4G modem (SMA) One for GPS (SMA) (IBR1100 only) Two for dual-band dual-concurrent WiFi (RSMA) Be careful to correctly distinguish between SMA and RSMA connections.
  • Page 11 CradlePoint COR IBR1100/IBR1150 – Manual RESET (power and factory reset button) On – Press and hold for one second to turn on. Multiple LEDs turn on to signal that the router is on. RELEASE THE BUTTON BEFORE FIVE SECONDS TO PREVENT THE ROUTER FROM TURNING OFF AGAIN.

  • Page 12: Quick Start

    1. Insert an activated SIM. A wireless broadband data plan must be added to your CradlePoint COR IBR1100/IBR1150. Wireless broadband data plans are available from wireless carriers such as Verizon, AT&T, Sprint, EE, and Vodafone. The SIM must be provisioned with the carrier. Contact your carrier for details about selecting a data plan and about the process for provisioning your SIM.
  • Page 13 CradlePoint COR IBR1100/IBR1150 – Manual 1. Remove the bottom SIM cover (requires a small Phillips screwdriver). 2. Slide the metal latch down to unlock the SIM cartridge. Use the cartridge marked SIM 1 first (use the other cartridge, SIM 2, for a secondary/backup SIM).
  • Page 14 CradlePoint COR IBR1100/IBR1150 – Manual Resources section of antenna and router product pages. Many network designs with the COR IBR1100/IBR1150 require remoted antennas with cables. Several factors affect antenna selection: require 3G/4G modem antennas only, or GPS/WiFi as well direct-attach, screw-mount, or magnetic-mount...
  • Page 15 Wall options COR IBR1100/IBR1150 extended temperature (−30 °C to 70 °C) 12VDC 2A locking power adapter – requires separate line cord (Part # 170648-000) Line cord for North America (Part # 170623-001)

  • Page 16: Accessing The Administration Pages

    CradlePoint COR IBR1100/IBR1150 – Manual environments can order the 170584-002 adapter, but it limits the operating temperature range to 0 °C to 40 °C. Vehicle options Vehicle locking power adapter for COR (Part # 170635-000) Two meter locking power and GPIO cable (direct wire) for replacement – included by default (Part # 170585-000) 4.
  • Page 17 CradlePoint COR IBR1100/IBR1150 – Manual 1. Open a browser window and type “cp/” or “192.168.0.1” in the address bar. Press ENTER/RETURN. 2. When prompted for your password, type the eight character DEFAULT PASSWORD found on the product label. It's possible – and more efficient – to do all your configuration changes through...

  • Page 18: First Time Setup Wizard

    Enterprise Cloud Manager, CradlePoint’s next generation management and application platform. Enterprise Cloud Manager (ECM) integrates cloud management with your CradlePoint devices to improve productivity, increase reliability, reduce costs, and enhance the intelligence of your network and business operations. Click here to sign up for a free 30-day ECM trial.
  • Page 19 Once you have registered your device, go to cradlepointecm.com and log in using your ECM credentials. For more information about how to use CradlePoint Enterprise Cloud Manager, see the following: Getting Started ECM on the Knowledge Base Navigating the Administration Pages To access the administration pages, open a web browser and type the hostname “cp/”...

  • Page 20: Quick Links

    Default Password. Quick Links The CradlePoint logo in the top left corner of all the administration pages is a link to the Dashboard (Status → Dashboard), which displays fundamental information about the router. The black bar across the top provides quick access to important information and controls: Internet Connection –...

  • Page 21: Configuration Pages

    CradlePoint Enterprise Cloud Manager is CradlePoint’s next generation management and application platform. Enterprise Cloud Manager (ECM) integrates cloud management with your CradlePoint devices to improve productivity, increase reliability, reduce costs, and enhance the intelligence of your network and business operations. 10/13/2014...

  • Page 22: First Time Setup

    Once you have registered your device, go to https://cradlepointecm.com and log in using your ECM credentials. For more information about how to use CradlePoint Enterprise Cloud Manager, see the following: Getting Started ECM on the Knowledge Base First Time Setup...

  • Page 23: Administrator Password

    Click NEXT. WiFi Network Name CradlePoint recommends that you customize your WiFi network name. Type in your personalized network name here. You can also enable the Guest Network feature (for more configuration options, see Network Settings → WiFi / Local Networks).
  • Page 24 NONE (OPEN): Select this option if you do not want to activate any security features. CradlePoint recommends BEST (WPA2) WiFi security. Try this option first and switch only if you have a device that is incompatible with WPA2. Choose a personalized WPA PASSWORD or WEP KEY. This password will be used to connect devices to the router’s WiFi broadcast once the security settings have been saved.
  • Page 25 CradlePoint COR IBR1100/IBR1150 – Manual If you are using a SIM-based modem (LTE/GSM/HSPA) with your CradlePoint router, you may need to configure the APN before it will properly connect to your carrier. Wireless carriers offer several APNs, so check with your carrier to confirm the appropriate one to use. Some examples include: AT&T: "broadband"...
  • Page 26 CradlePoint COR IBR1100/IBR1150 – Manual Idle Check Interval: Set the number of seconds the router will wait between checks to see if the WAN is still available. (Default: 30 seconds. Range: 10-3600 seconds.) Monitor while connected: Select from the dropdown menu. (Default: Off.) Active Ping: A ping request will be sent to the Ping Target.

  • Page 27: Ip Passthrough Setup

    You can quickly enable IP passthrough with the IP Passthrough Setup Wizard available under Getting Started → IP Passthrough Setup. IP passthrough takes a 3G/4G WAN data source (USB, ExpressCard, or CradlePoint business-grade modem) and passes the IP address through to Ethernet LAN.

  • Page 28: Wireless Clients

    CradlePoint COR IBR1100/IBR1150 – Manual Wireless Clients For each device using a wireless connection to your router, the following information is displayed: Hostname, IP, MAC, Connection, and Time Online. Wired Clients For each device using a wired connection to your router, the following information is displayed: Hostname, IP, and MAC.
  • Page 29 CradlePoint COR IBR1100/IBR1150 – Manual To set up or edit a CP Secure Connect tunnel, go to Internet → VPN Tunnels. NOTE: CP Secure Connect requires a feature license. Dashboard The Dashboard shows fundamental information about your router, divided into the following basic categories:...

  • Page 30: Router Information

    WiFi Networks – Network Settings → WiFi / Local Networks After the initial setup of the router, every time you log in you will automatically be directed to this Dashboard. Also, you can click on the CradlePoint logo in the upper left-hand corner to return to the Dashboard from any page.

  • Page 31: Local Networks

    CradlePoint COR IBR1100/IBR1150 – Manual Internet “Detailed Info” links to Internet → Connection Manager. State – Connected/Disconnected Signal Strength – Expressed as a percentage (Signal Strength is not included if Ethernet is the WAN type) WAN Type – Ethernet, Modem, or WiFi as WAN Connection Type –...
  • Page 32 CradlePoint COR IBR1100/IBR1150 – Manual Router Alerts includes links to System Settings → System Software (for new firmware) and Internet → Connection Manager. If a modem capable of providing GPS coordinates is connected and GPS support is enabled, this page will show a graphical view of your router's location. See the GPS section in System Settings →...

  • Page 33: Gre Tunnels

    CradlePoint COR IBR1100/IBR1150 – Manual from the GPS satellites. GRE Tunnels View the status of configured GRE Tunnels. To set up or edit a GRE tunnel, go to Internet → GRE Tunnels. Included information: Name Status Transmit (packets/bytes) Receive (packets/bytes) Hotspot Clients View the status of the clients that have logged in through the Hotspot/Captive Portal.
  • Page 34 3G/4G modem WiFi as WAN The information displayed varies greatly depending on the technology, especially for 3G/4G modems. CradlePoint passes on the information provided by the modems, which is specific to the carrier (e.g. Verizon) and technology (e.g. LTE). Ethernet example:...
  • Page 35 CradlePoint COR IBR1100/IBR1150 – Manual WiFi as WAN example: 10/13/2014...
  • Page 36 CradlePoint COR IBR1100/IBR1150 – Manual Routing System Routes displays routes associated with networks connected to the router as well as routes learned from routing protocols (such as RIP or BGP). Static Routes displays user-specified routes configured in Network Settings → Routing.

  • Page 37: System Logs

    CradlePoint COR IBR1100/IBR1150 – Manual Diagnostics.” Sample rate and size can be adjusted from the dropdown boxes. Data Usage: A measure of the amount of information that is currently being sent or received through the network. Sample rate and size can be adjusted from the dropdown boxes.

  • Page 38: Vpn Tunnels

    CradlePoint COR IBR1100/IBR1150 – Manual The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The log options allow you to filter the router logs so you can easily find relevant messages. This router also has external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility.

  • Page 39: Network Settings

    CradlePoint COR IBR1100/IBR1150 – Manual Protocols Transferred Direction Time Online Control To set up or edit a VPN tunnel, go to Internet → VPN Tunnels. WiPipe QoS View the breakdown of packets and bytes sent and received associated with each WiPipe QoS rule.

  • Page 40: Content Filtering

    CradlePoint COR IBR1100/IBR1150 – Manual Content Filtering You have two main options for filtering content for local networks. 1. WebFilter Rules: Create a list of websites that will be either disallowed or allowed. Customize the filter settings for each network and/or each MAC address. (These rules will not block HTTPS websites.)
  • Page 41 CradlePoint COR IBR1100/IBR1150 – Manual Rule Priority: Higher number rules overrule lower number rules. Enabled: A rule can be enabled or disabled by selecting or deselecting the checkbox. Click Submit to save your rule changes. Default Network Filter Settings Use Default Network Filter Settings together with Network WebFilter Rules to control website access. All of your networks are set to allow website access by default.
  • Page 42 CradlePoint COR IBR1100/IBR1150 – Manual network to each rule. See the Network WebFilter Rules section (above) for more configuration details. MAC Address WebFilter Defaults Use MAC Address WebFilter Defaults together with MAC Address WebFilter Rules to control website access for specific MAC addresses. By default, each MAC address is allowed website access.
  • Page 43 CradlePoint COR IBR1100/IBR1150 – Manual Select a third-party Cloud Provider from the dropdown list. Umbrella by OpenDNS Zscaler Umbrella by OpenDNS Umbrella by OpenDNS is a cloud-based web filtering and security solution that protects you online by filtering websites. Go to http://www.opendns.com/business-security/...

  • Page 44: Dhcp Server

    CradlePoint COR IBR1100/IBR1150 – Manual Enter your Zscaler account information to enable these settings. Input local network information (Network Address and Netmask) to assign your Zscaler implementation to one or more local network(s). DHCP Server DHCP stands for Dynamic Host Configuration Protocol. The built-in DHCP server automatically assigns IP addresses to the computers and other devices on each local area network (LAN).

  • Page 45: Dns Settings

    CradlePoint COR IBR1100/IBR1150 – Manual DNS, or Domain Name System, is a naming system that translates between domain names (www.cradlepoint.com, for example) and Internet IP addresses (206.207.82.197). A DNS server acts as an Internet phone book, translating between names that make sense to people and the more complex numerical identifiers. The DNS page for the device has these distinct functions: DNS Settings: By default your router is set to automatically acquire DNS servers through your Internet provider (Automatic).
  • Page 46 CradlePoint COR IBR1100/IBR1150 – Manual Enable Dynamic DNS: Enable this option only if you have purchased your own domain name and registered with a Dynamic DNS service provider. Server Type. Select a dynamic DNS service provider from the dropdown list:...
  • Page 47 CradlePoint COR IBR1100/IBR1150 – Manual Click Add to name a device in your network. Fill in the following fields: Hostname: Choose a name that is meaningful to you. No spaces are allowed in this field. IP address: The address of the device within your network.

  • Page 48: Port Forwarding Rules

    CradlePoint COR IBR1100/IBR1150 – Manual Select from the following tabs to edit your firewall configuration: Port Forwarding Rules Port Proxying Rules Network Prefix Translation DMZ (DeMilitarized Zone) Remote Admin. Access Application Gateways Firewall Options Zone Firewall Port Forwarding Rules A port forwarding rule allows traffic from the Internet to reach a computer on the inside of your network. For example, a port forwarding rule might be used to run a Web server.
  • Page 49 CradlePoint COR IBR1100/IBR1150 – Manual Add/Edit Port Forwarding Rule Name: Name your rule. Enabled: Toggle whether your rule is enabled. Selected by default. Use Port Range: Changes the selection options to allow you to input a range of ports (if desired).
  • Page 50 IPv6 providers, but it cannot be used effectively in all situations. The primary purpose for CradlePoint’s NPT implementation is for failover/failback and load balancing setups. LAN clients can potentially retain the original IPv6 lease information and may experience a more seamless transition when WAN connectivity changes than if not utilizing NPT.
  • Page 51 CradlePoint COR IBR1100/IBR1150 – Manual A DMZ host is effectively not firewalled in the sense that any computer on the Internet may attempt to remotely access network services at the DMZ IP address. Typical uses involve running a public Web server or sharing files.

  • Page 52: Firewall Options

    CradlePoint COR IBR1100/IBR1150 – Manual Exercise caution in enabling application gateways as they impact the security of your network. Enable any of the following types of application gateways: PPTP: For virtual private network access using Point-to-Point Tunneling Protocol. This is enabled by default.
  • Page 53 CradlePoint COR IBR1100/IBR1150 – Manual The All zone is a special zone used to support legacy firewall configurations. This zone cannot be removed and is reserved for forward-migration of IP Filter Rules from previous firmware versions. The All zone matches any traffic handled by the router. User defined zones are preferred.
  • Page 54 Field 2: Choose one of the following: Port – Select by the physical port on the router (e.g., "Modem 1"). Manufacturer – Select by the modem manufacturer (e.g., "CradlePoint Inc."). Model – Select according to the specific model of modem.
  • Page 55 CradlePoint COR IBR1100/IBR1150 – Manual Name: Create a name meaningful to you. Default Action: Choose either Allow or Deny. This is the action taken by the firewall if none of the filter policy rules match the traffic being filtered. Click Add to create a new rule for this filter policy.
  • Page 56 CradlePoint COR IBR1100/IBR1150 – Manual Log: When checked each packet matching this filter rule will be logged in the System Logs. Action: “Allow” or “Deny”. Protocol: Any, ICMPv4, TCP, UDP, GRE, ESP, ICMPv6, or SCTP. IP Version: Any, IPv4, or IPv6.

  • Page 57: Mac Filter / Logging

    CradlePoint COR IBR1100/IBR1150 – Manual MAC Filter / Logging A MAC (Media Access Control) address is a unique identifier for a computer or other device. This page allows you to manage clients by MAC address. You can filter clients by MAC addresses and/or keep a log of devices connected to your router.
  • Page 58 CradlePoint COR IBR1100/IBR1150 – Manual Ignored MAC Addresses: This is the list of MAC addresses that will not produce an alert or a log entry when they are connected to the router. These should be MAC addresses that you expect to be connected to the router. To add MAC addresses to this list, simply select devices shown in the MAC Address Log and click “Ignore.” You can also add addresses manually.

  • Page 59: Routing Protocols

    CradlePoint COR IBR1100/IBR1150 – Manual Distribute: Allow this static route to be distributed via a routing protocol (Network Settings → Routing Protocols). Routing Protocols NOTE: Routing Protocols require a feature license. Go to System Settings → Feature Licenses to enable these features.
  • Page 60 CradlePoint COR IBR1100/IBR1150 – Manual same router-ID. Enabled: Click to enable/disable the policy. (Default: enabled.) Networks Associated with ASN or IPv6 Networks Associated with ASN: To configure a BGP router, you need an AS number. An AS number is an identification of autonomous system.
  • Page 61 CradlePoint COR IBR1100/IBR1150 – Manual Area: Areas are identified by an ID. Default Cost: Set the cost of default-summary LSAs announced to stubby areas. Stub Area: Configure area to be stub area. No-Summary: Prevents ABR from injecting inter-area summaries into the specified stub area OSPF Editor Router ID: This sets the router-ID of the OSPF process.

  • Page 62: Rip Routing

    CradlePoint COR IBR1100/IBR1150 – Manual Redistribute Routes: Redistribute routes of the specified protocol or kind into BGP, with the metric type and metric set (if specified), filtering the routes using the given route map (if specified). Redistributed routes may also be filtered with distribute lists.
  • Page 63 CradlePoint COR IBR1100/IBR1150 – Manual Networks: Set the RIP-enabled interfaces by network. RIP is enabled on the interfaces that have addresses within the network range. Neighbors: When a neighbor doesn't understand multicast, this command is used to specify neighbors. In some cases, not all routers will be able to understand multicasting, where packets are sent to a network or a group of addresses.

  • Page 64: Access Lists

    CradlePoint COR IBR1100/IBR1150 – Manual Networks: Set the RIPng-enabled interfaces by network using IPv6 addresses. RIPng is enabled on the interfaces that have addresses within the network range. Routes: Set RIPng static routing announcement of specified network address. Redistribute Routes: Redistribute routes of the specified protocol or kind into RIPng, with the metric type and metric set if specified, filtering the routes using the given route-map if specified.

  • Page 65: Route Map

    CradlePoint COR IBR1100/IBR1150 – Manual Name: Choose a unique name. Allow: Select “Permit” or “Deny”. IP Address: Input the IP addresses that you want permitted or denied. Netmask: Use this along with “IP Address” to specify a range of IP Addresses associated with this Access Lists rule.
  • Page 66 CradlePoint COR IBR1100/IBR1150 – Manual WiFi / Local Networks This section is used to configure the settings for networks created by your router (LAN). Note that changes made in this section may also need to be duplicated on wireless devices that you want to connect to your wireless network.

  • Page 67: General Settings

    Name: This primarily helps to identify this network during other administration tasks. Hostname: [Default: cp (for CradlePoint)] The hostname is the DNS name associated with the router's local area network IP address. NOTE: You can access the router’s administration pages by typing the hostname into your browser, so if you change “cp” to another hostname, you can access the administration pages through the new hostname.

  • Page 68: Ipv6 Settings

    CradlePoint COR IBR1100/IBR1150 – Manual IP Address: This is the address used by the router for local area network communication. Changes to this parameter may require a restart to computers on this network. Each network must have a distinct IP address. Most users will want an address from one of the following private IP ranges: 10.0.0.1 - 10.255.255.1...
  • Page 69 CradlePoint COR IBR1100/IBR1150 – Manual IPv6 Address Source: By default, this is set to Delegated, which means the IPv6 address range for the LAN is passed through from the WAN side. Change this to Static to input your own IPv6 address range here, or select None to explicitly disable IPv6 LAN connectivity.

  • Page 70: Access Control

    CradlePoint COR IBR1100/IBR1150 – Manual If you want more interface options, you must configure additional WiFi, Ethernet ports, and VLAN interfaces separately. See the Local Network Interfaces section below (on this same administration page: Network Settings → WiFi / Local Networks).
  • Page 71 CradlePoint COR IBR1100/IBR1150 – Manual Changing settings for the IPv4 DHCP server is optional. The default selections are almost always sufficient. DHCP Server: (Default: Enabled) When the DHCP server is enabled, users of your network will be able to automatically connect to the Internet without any special configuration.

  • Page 72: Ipv6 Addressing

    CradlePoint COR IBR1100/IBR1150 – Manual need to wrap this value in quotes. For example, option 66 (Server name) requires quotes around IP addresses. DHCP Relay: DHCP Relay communicates with a DHCP server and acts as a proxy for DHCP broadcast messages that must be routed to remote segments. This is accomplished by converting broadcast DHCP messages to unicast messages to communicate between clients and servers.
  • Page 73 CradlePoint COR IBR1100/IBR1150 – Manual Multicast Proxy: Select to enable IGMP proxy support to allow multicast streams to flow across this network. Quick Leave Mode: Disable quick leave mode if it's vital that the daemon should act exactly as a real multicast client on the upstream interface. However, disabling this function increases the risk of bandwidth saturation.
  • Page 74 CradlePoint COR IBR1100/IBR1150 – Manual Schedule Service: (Default: Disabled.) Select to enable. This will open a configurable chart for setting the schedule. Each hour of the week is represented by a black or gray square. Black represents disabled, while gray represents enabled. Hover over a square to reveal the hour it represents.
  • Page 75 CradlePoint COR IBR1100/IBR1150 – Manual VRRP (Virtual Router Redundancy Protocol) allows you to associate multiple routers with one LAN so that if the primary physical router fails, the LAN will keep the same settings via the virtual router. Enable VRRP: Select to enable VRRP configuration options.
  • Page 76 CradlePoint COR IBR1100/IBR1150 – Manual Spanning Tree Protocol (STP) allows a network design to include redundant paths while preventing broadcast radiation from bridge loops. Enable STP: Enable Spanning Tree Protocol loop detection. Bridge Priority: Set the priority of the bridge. When determining the root bridge of the spanning tree topology, the bridge priority is compared first. The bridge with the lowest priority value will win.
  • Page 77 CradlePoint COR IBR1100/IBR1150 – Manual Wired 802.1X: (requires hardware version 2.0) This allows you to configure an authentication server that will accept authentication requests from devices attached to wired Ethernet ports. IEEE 802.1X defines the encapsulations of the Extensible Authentication Protocol (EAP).
  • Page 78 CradlePoint COR IBR1100/IBR1150 – Manual Select from the following tabs: WiFi Radio #1 Settings (2.4 GHz) WiFi Radio #2 Settings (5 GHz) Ethernet Port Configuration VLAN Interfaces Wireless (WiFi) Network Settings Each wireless radio (2.4 GHz and 5 GHz) can broadcast as many as four SSIDs (service set identifiers – the names for WiFi networks). One primary WiFi network is enabled by default, while you may have enabled a second guest network when using the First Time Setup Wizard.
  • Page 79 WPA Enterprise WEP Auto Open Select “Open” to create a hotspot: otherwise select the best security that your devices will support (CradlePoint recommends WPA2). Depending on which Security Mode you select, there are different setup options. “Personal” security modes require passwords.

  • Page 80: Ethernet Port Configuration

    Enterprise. In order to protect your network from hackers and unauthorized users, CradlePoint highly recommends WPA2/AES for security if your attached devices can support it. WEP and WPA/TKIP are obsolete and have been replaced by WPA/AES. Using those security settings will cause the WiFi to limit to 802.11g modes.

  • Page 81: Vlan Interfaces

    CradlePoint COR IBR1100/IBR1150 – Manual Port Group ID: The Group ID field provides a reference to this grouping of ports to be used in other parts of the router configuration. For example, this ID is referenced in the Local IP Networks configuration to attach this logical group of Ethernet ports with a network configuration. Use a simple short text phrase to describe this group, such as "main", "guestports", "backup_wan", etc.
  • Page 82 CradlePoint COR IBR1100/IBR1150 – Manual Ethernet Group: Select the LAN port(s) with which you want to associate the VLAN ID from a dropdown list. Your Ethernet group must be created separately under Ethernet Port Configuration. Click Submit to save your configured VLAN.
  • Page 83 CradlePoint COR IBR1100/IBR1150 – Manual WiMAX radios will conflict with each other, which may result in lower throughput. Select a channel from the dropdown list: 1 (2412 MHz) 2 (2417 MHz) 3 (2422 MHz) 4 (2427 MHz) 5 (2432 MHz)
  • Page 84 CradlePoint COR IBR1100/IBR1150 – Manual Channel Width: Selects whether the router uses a single 20 MHz channel to send/receive, or uses two adjacent 20 MHz channels to create a 40 MHz channel. Higher performance is possible with the 40 MHz channel. Selecting Auto is generally best. Enabling WiFi as WAN will force 20 MHz only mode.
  • Page 85 CradlePoint COR IBR1100/IBR1150 – Manual 20% or less. Click Add to create a new Traffic Shaping/QoS queue. Queue Name: Choose a name that is meaningful to you. Upload Bandwidth Enable Upload QoS: (Default: Enabled.) Deselect if you want your rule to apply to download traffic only. Leave this selected to include upload restrictions with this queue.
  • Page 86 CradlePoint COR IBR1100/IBR1150 – Manual Enable Download QoS: (Default: Enabled.) Deselect if you want your rule to apply to upload traffic only. Leave this selected to include download restrictions with this queue. Borrow Spare Bandwidth: (Default: Enabled.) When this is enabled, the interfaces/protocols associated with this rule will borrow unused bandwidth from other rules.
  • Page 87 CradlePoint COR IBR1100/IBR1150 – Manual Click Add to create a new Traffic Shaping rule. Traffic Shaping / QoS Rule Editor The first page of the Traffic Shaping / QoS Rule Editor allows you enable/disable the rule, name the rule, specify a protocol for the rule, and select a queue to associate the rule with.
  • Page 88 CradlePoint COR IBR1100/IBR1150 – Manual Use ports and/or IP addresses to define the type(s) of traffic attached to this rule. Leaving any field blank will match all values; all fields are optional. Source Port(s) and/or Destination Port(s): Enter a port number between 1 and 65535. To enter a single port number, input the number into the left box. To enter a range of ports, fill in both boxes separated by the colon.

  • Page 89: Connection Manager

    CradlePoint COR IBR1100/IBR1150 – Manual VPN Tunnels WAN Affinity / Load Balancing WiFi as WAN Connection Manager The router can establish an uplink via Ethernet, WiFi as WAN, or 3G/4G modems (integrated or external USB). If the primary WAN connection fails, the router will automatically attempt to bring up a new link on another device: this feature is called failover.

  • Page 90: Wan Configuration

    CradlePoint COR IBR1100/IBR1150 – Manual Stats: bytes in, bytes out Uptime Click “Edit” to view configuration options for the selected device. For 3G/4G modems, click “Control” to view options to activate or update the device. WAN Configuration Select a WAN interface and click on Edit to open the WAN Configuration editor. The tabs available in this editor are specific to the particular WAN interface types.
  • Page 91 CradlePoint COR IBR1100/IBR1150 – Manual Idle Check Interval: The amount of time between each check. (Default: 30 seconds. Range: 10-3600 seconds.) Monitor while connected: (Default: Off) Select from the following dropdown options: Passive DNS (modem only): The router will take no action until data is detected that is destined for the WAN. When this data is detected, the data will be sent and the router will check for received data for 2 seconds.
  • Page 92 CradlePoint COR IBR1100/IBR1150 – Manual Usage: Fail back based on the amount of data passed over time. This is a good setting for when you have a dual-mode EVDO/WiMAX modem and you are going in and out of WiMAX coverage. If the router has failed over to EVDO it will wait until you have low data usage before bringing down the EVDO connection to check if a WiMAX connection can be made.
  • Page 93 CradlePoint COR IBR1100/IBR1150 – Manual Syslog SNMP over the WAN (LAN works) There are two main types of IPv6 WAN connectivity: native (Auto and Static) and tunneling over IPv4 (6to4, 6in4, and 6rd). Native – (Auto and Static) The upstream ISP routes IPv6 packets directly.
  • Page 94 CradlePoint COR IBR1100/IBR1150 – Manual Static As with IPv4, static configuration is available for situations where the WAN IPv6 topology is fixed. IPv6 Address/CIDR – Input the IPv6 static IP address and mask length provided by your ISP (see the Wikipedia explanation of CIDR).
  • Page 95 CradlePoint COR IBR1100/IBR1150 – Manual 6in4 Tunnel The 6in4 tunnel mode utilizes explicit IPv4 tunnel endpoints and encapsulates IPv6 packets using 41 as the specified protocol type in the IP header. A 6in4 tunnel broker provides a static IPv4 server endpoint, decapsulates packets, and provides routing for both egress and ingress IPv6 packets. Most tunnel brokers provide a facility to request delegated networks for use through the tunnel.

  • Page 96: Ethernet Settings

    CradlePoint COR IBR1100/IBR1150 – Manual Example Configuration: Ethernet Settings While default settings for each WAN Ethernet port will be sufficient in most circumstances, you have the ability to control the following: Connect Method: DHCP (Automatic), Static (Manual), or PPPoE (Point-to-Point Protocol over Ethernet).

  • Page 97: Modem Settings

    CradlePoint COR IBR1100/IBR1150 – Manual IPv4 Address Subnet Mask Gateway IP Primary DNS Server Secondary DNS Server PPPoE: Username Password Password Confirm Service Auth Type: None, PAP, or CHAP Modem Settings Not all modems will have all of the options shown below; the available options are specific to the modem type.
  • Page 98 CradlePoint COR IBR1100/IBR1150 – Manual On Demand: When this mode is selected a connection to the Internet is made as needed. When this mode is not selected a connection to the Internet is always maintained. IP WAN Subnet Filter: This feature will filter out any packets going to the modem that do not match the network (address and netmask).

  • Page 99: Wimax Settings

    CradlePoint COR IBR1100/IBR1150 – Manual Auto (all modes): Let the modem decide which network to use. Auto 3G (3G or less): Let the modem decide which 2G or 3G network to use. Do not attempt to connect to LTE. Force LTE: Connect to LTE only and do not attempt to connect to 3G or WiMAX.

  • Page 100: Cdma Settings

    CradlePoint COR IBR1100/IBR1150 – Manual BridgeMAXX – bridgeMAXX.com Time Warner Cable – mobile.rr.com Comcast – mob.comcast.net TTLS Authentication Mode: TTLS inner authentication protocol. Select from the following dropdown options: MSCHAPv2/MD5 (Microsoft Challenge Handshake Authentication Protocol version2/Message-Digest Algorithm 5) PAP (Password Authentication Protocol) CHAP (Challenge Handshake Authentication Protocol) TTLS Username: Username for TTLS authentication.
  • Page 101 CradlePoint COR IBR1100/IBR1150 – Manual SIM/APN/Auth Settings SIM PIN: PIN number for a GSM modem with a locked SIM. Authentication Protocol: Set this only if your service provider requires a specific protocol and the Auto option chooses the wrong one. Choose from Auto, PAP, and CHAP and then input your username and password.
  • Page 102 CradlePoint COR IBR1100/IBR1150 – Manual The modem supports Update/Activate methods: A message will display showing options for each supported method: Modem Activation / Update: Activate, Reactivate, or Upgrade Configuration. Preferred Roaming List (PRL) Update Firmware Update Management Object (FUMO) Click the appropriate icon to start the process.
  • Page 103 CradlePoint COR IBR1100/IBR1150 – Manual Update Modem Firmware Click on the Firmware button to open the Modem Firmware Upgrade window. This will show whether there is new modem firmware available. If you select Automatic (Internet) the firmware will be updated automatically. Use Manual Firmware Upgrade to instead manually upload firmware from a local computer or device.

  • Page 104: Filter Criteria

    CradlePoint COR IBR1100/IBR1150 – Manual WAN Configuration Rule Editor After clicking “Add” or “Edit,” you will see a popup with the following tabs: Filter Criteria General Settings IP Overrides IPv6 Settings Ethernet Settings Modem Settings WiMAX Settings CDMA Settings SIM/APN/Auth Settings Filter Criteria If you are creating a new rule, begin by setting the Filter Criteria .

  • Page 105: Client Data Usage

    When you select Enable Data Usage, you will see the Data Usage Agreement shown below. The purpose of this agreement is to ensure that you understand that the data numbers for your router might not perfectly match those of your carrier: CradlePoint cannot be held responsible. You must accept the agreement by clicking "Yes" in order to begin creating data usage rules.
  • Page 106 CradlePoint COR IBR1100/IBR1150 – Manual The Date Usage Rule display shows basic information for each rule you have created (including rules created with a template). The following information is displayed: Rule Name Enabled: True/False Date for Rule Reset Cycle Type: Daily, Weekly, or Monthly Cap: Amount in MB.
  • Page 107 CradlePoint COR IBR1100/IBR1150 – Manual Data Usage Rule – page 2 Cycle Type: How often the rule will reset. The data usage amount will be reset at the end of each cycle. Select the length of a cycle from a dropdown menu with the...

  • Page 108: Historical Data

    GRE Tunnels Generic Routing Encapsulation (GRE) tunnels can be used to create a connection between two private networks. Most CradlePoint routers are enabled for both GRE and VPN tunnels. GRE tunnels are simpler to configure and more flexible for different kinds of packet exchanges, but VPN tunnels are much more secure.
  • Page 109 CradlePoint COR IBR1100/IBR1150 – Manual In order to set up a tunnel you must configure the following: Local Network and Remote Network addresses for the “Glue Network,” the network that is created by the administrator that serves as the “glue” between the networks of the tunnel.
  • Page 110 Port – Select by the physical port on the router that you are plugging the modem into (e.g., "USB Port 2"). Manufacturer – Select by the modem manufacturer (e.g., "CradlePoint Inc."). Model – Set your rule according to the specific model of modem.

  • Page 111: L2Tp Tunnels

    CradlePoint COR IBR1100/IBR1150 – Manual GRE keep-alive packets may be sent from both sides of a tunnel, or from just one side. Enabled: Select to enable GRE Keep Alive to continually send keep-alive packets to the remote peer. Rate: Choose the length of time in seconds for each check (Default: 10 seconds. Range: 2 – 3600 seconds).
  • Page 112 CradlePoint COR IBR1100/IBR1150 – Manual Tunnel Name – Enter a name to uniquely identify this tunnel. LNS address – Enter the IP Address of the LNS (tunnel server) peer. MTU – Set the maximum transmission unit (MTU) for the L2TP tunnel.
  • Page 113 CradlePoint COR IBR1100/IBR1150 – Manual Remote Name – Authorization name specified by and to the remote system as its identity, sometimes a username or hostname. Leave blank to match any. Local Name – Authorization name specified by and to the remote system as the local system identity; sometimes a username or hostname. Leave blank to match any.

  • Page 114: Network Mobility (Nemo)

    CradlePoint COR IBR1100/IBR1150 – Manual Network Address – This is the network address that is the destination of the route. This should be set to the network address at the remote side of the tunnel. Netmask – This is the corresponding subnet mask of the network being defined.
  • Page 115 CradlePoint COR IBR1100/IBR1150 – Manual Network Mobility (NEMO) Settings Home IP Address and Home Netmask – These may be provided by your NEMO service provider. The IP address is a placeholder, “dummy” address; any IP address can be used (1.2.3.4 is common).

  • Page 116: Openvpn Tunnels

    CradlePoint COR IBR1100/IBR1150 – Manual Enabled: Enable or disable the interface. Name: Give the interface a unique name that matches the mGRE (multipoint GRE) tunnel. Select from configured GRE tunnels or input manually. Peer Authentication: Embeds the secret plaintext password to outgoing NHRP packets. Incoming NHRP packets on this interface are discarded unless this password is present.
  • Page 117 CradlePoint COR IBR1100/IBR1150 – Manual Once you have a valid feature license, click Add to create a new OpenVPN tunnel. Click Edit to make changes to an existing tunnel. Add/Edit Tunnel – General Tunnel Enabled – Click to enable/disable this tunnel.
  • Page 118 CradlePoint COR IBR1100/IBR1150 – Manual Host – IP address of the remote server. Port – Specify the port if desired. Protocol – Select UDP or TCP. Add/Edit Tunnel – Certificate Settings Generate or upload certificates for OpenVPN. If the Configuration Mode is set to Simple, you have the option to set the TLS-Auth Key.
  • Page 119 IPsec (Internet Protocol security) to authenticate and encrypt packets exchanged across the tunnels. To set up a VPN tunnel with a CradlePoint router on one end, there must be another device (usually a router) that also supports IPsec on the other end.
  • Page 120 Tunnel Enabled: Enabled or Disabled. MBR1200 Quick Connect: VPN tunnels in more advanced CradlePoint devices have more choices than they did in the MBR1200, so they are more complex to configure now. Check this box to simplify setup by streamlining your options to match the old settings from the CradlePoint MBR1200.
  • Page 121 CradlePoint COR IBR1100/IBR1150 – Manual Invert WAN Binding: Advanced option that inverts the meaning of WAN Binding to only establish this tunnel when the specified WAN Binding device(s) are NOT connected. Add/Edit Tunnel – Local Networks IP Version: Select IPv4 or IPv6.
  • Page 122 CradlePoint COR IBR1100/IBR1150 – Manual Add/Edit Tunnel – IKE Phase 1 IKE security has two phases, Phase 1 and Phase 2. You have the ability to distinctly configure each phase, but the default settings will be sufficient for most users.
  • Page 123 CradlePoint COR IBR1100/IBR1150 – Manual Note that some Encryption/Hash combinations (e.g., 3DES with SHA2 384/512) are computationally expensive, impacting WAN performance. AES is as strong an encryption and performs much better than 3DES. DH Groups: The DH (Diffie-Hellman) Group is a property of IKE and is used to determine the length of prime numbers associated with key generation. The strength of the key generated is partially determined by the strength of the DH Group.
  • Page 124 CradlePoint COR IBR1100/IBR1150 – Manual Connection Idle Time: Configure how long the router will allow an IPsec session to be idle before beginning to send Dead Peer Detection (DPD) packets to the peer machine. (Default: 30 seconds. Range: 10 – 3600 seconds.) Request Frequency allows you to adjust the delay between these DPD packets.

  • Page 125: Load Balance

    CradlePoint COR IBR1100/IBR1150 – Manual Enable Certificate Support: Enabling Certificate Support will allow you to load a certificate for VPN to the router. Click the “Upload Certificate” button to browse for a certificate on a local device. Disabling certificate support will no longer use any previously loaded certificate but will not delete it from the router. Only one certificate at a time is supported.

  • Page 126: Wan Affinity

    CradlePoint COR IBR1100/IBR1150 – Manual interfaces at a similar percentage of the assigned data cap in the data usage rule for each interface, rather than distributing sessions based solely on bandwidth. For proper functioning you need to create data usage rules for each WAN device you will be load balancing. Make certain to select the "Use with Load Balancing"...

  • Page 127: Wifi As Wan

    Port – Select by the physical port on the router that you are plugging the modem into (e.g., "USB Port 2"). Manufacturer – Select by the modem manufacturer (e.g., "CradlePoint Inc."). Model – Set your rule according to the specific model of modem.

  • Page 128: Saved Profiles

    CradlePoint COR IBR1100/IBR1150 – Manual All CradlePoint routers and some other routers use the same default IP address for the primary network: 192.168.0.1. If you attempt to set up WiFi as WAN and there is an “IP conflict,” you need to change the IP address. The router is attempting to use the same IP address for both WAN and LAN, which is impossible. Go to Network Settings →...

  • Page 129: Site Survey

    CradlePoint COR IBR1100/IBR1150 – Manual Site Survey This is a list of WiFi networks that the router can currently find, along with information about the network such as its mode and channel. Click “Refresh” if a WiFi network you want to connect to is invisible. You can sort the list based on any of the fields by clicking on the field name.

  • Page 130: Router Security

    CradlePoint COR IBR1100/IBR1150 – Manual Router Services Temperature Router Security Advanced Security Mode – Select to enable the following additional security features and options: TACACS+ and RADIUS server authentication options Option for multiple users Increase password security: minimum 7 characters...
  • Page 131 CradlePoint COR IBR1100/IBR1150 – Manual TACACS+ TACACS+ stands for “Terminal Access Controller Access-Control System plus”. The router will use a TACACS+ server (or two, optionally) to authorize administration. Server Timeout – If the servers are not reached within the set time (possibly because the WAN is down), the router will automatically fall back to using Local Users mode to prevent users from being locked out.

  • Page 132: System Clock

    CradlePoint COR IBR1100/IBR1150 – Manual Server Timeout – If the servers are not reached within the set time (possibly because the WAN is down), the router will automatically fall back to using Local Users mode to prevent users from being locked out.

  • Page 133: Remote Management

    CradlePoint COR IBR1100/IBR1150 – Manual Enable Internet Bounce Pages – Bounce pages show up in your web browser when the router is not connected to the Internet. They inform you that you are not connected and try to explain why. If you disable bounce pages then you will just get the usual browser timeout. In the normal case when the router is connected to the Internet you don't see them at all.
  • Page 134 If you have an attached device with GPS support (SIM-based models with GPS support require that the SIM is inserted), you can enable a graphical view of your router’s location, which appears in Status → GPS. You can also enable GPS NMEA format sentence reporting (or TAIP for the COR IBR1100/IBR1150) to a server (LAN, WAN, or remote).
  • Page 135 (in addition to the standard sentences): $PCPTI,{System ID},{router timestamp},{GGA timestamp},{GGA checksum}*{checksum} “PCPTI” stands for Proprietary, CradlePoinT, Identification (P-CPT-I). NMEA GGA, RMC, and VTG sentences The device reports GPS information with multiple NMEA (National Marine Electronics Association) sentence formats: GGA, RMC, and VTG. For more examples and information about NMEA sentences, see the following websites: http://aprs.gids.nl/nmea/...
  • Page 136 TAIP – COR IBR1100/IBR1150 only The COR IBR1100/IBR1150 gives you the option to select the GPS language: NMEA or TAIP. The Trimble ASCII Interface Protocol (TAIP) was designed for vehicle tracking. Selecting TAIP reveals additional options specific to the protocol.

  • Page 137: How To Send An Sms Message

    1 and 16 characters. It should be long enough to be useful for security but short enough to easily type into your phone (or other texting client). White List – This list is blank by default, which means that the router will accept SMS messages from any phone number. Leaving this blank is unsecure, so CradlePoint recommends that you add phone numbers to this list.

  • Page 138: Sms Commands

    CradlePoint COR IBR1100/IBR1150 – Manual 2. the SMS password (defined above) 3. the command You must know the MDN (Mobile Directory Number) of the modem to send SMS messages to the router. This is a phone number that can be found under Status →...
  • Page 139 CradlePoint COR IBR1100/IBR1150 – Manual restore – Restore the router to factory defaults Syntax: <password>,restore, Example: 1234,restore, rstatus – Get router status Syntax: <password>,rstatus, Example: 1234,rstatus, mstatus – Get modem status (port parameter optional) Syntax: <password>,mstatus,[port,] Examples: 1234,mstatus, //return status of highest priority modem...
  • Page 140 CradlePoint COR IBR1100/IBR1150 – Manual Examples: 1234,mreboot, //reboot the highest priority modem 1234,mreboot,usb1, //reboot the modem plugged into port usb1 apn – Reboot the modem (port parameter optional) Syntax: <password>,apn,<new APN>,[port,] Examples: 1234,apn,myapn@apn.com, //set APN of highest priority modem 1234,apn,myapn@apn.com,usb1, //set APN for modem in port usb1 userpass –...

  • Page 141: System Logging

    CradlePoint COR IBR1100/IBR1150 – Manual 1234,log,10, //return items 10 through 19 of the log 1234,log,20, //return items 20 through 29 of the log Sending log information via SMS messages likely results in several resulting texts. Please be aware of the costs of text messages on the modem’s account, and use this command only if necessary.
  • Page 142 If this occurs, disable this option. Log to attached USB stick: Only enable this option if instructed by a CradlePoint support agent. This will write a very verbose log file to the root level of an attached USB stick.

  • Page 143: Certificate Management

    (ITU-T standard) PKCS #12 Digital certificates have multiple possible uses in a CradlePoint networking setup. For example, a digital certificate is a much more secure option for VPN tunnel authentication than a pre-shared key. Go to the following sections for more information about specific certificate management options: Create Certificates –...

  • Page 144: Create Certificates

    CradlePoint COR IBR1100/IBR1150 – Manual Not all Certificate Management options displayed here are currently available via the Enterprise Cloud Manager configuration pages. Create Certificates Complete the following fields to create certificates locally, including (certificate authority) certificates. To create local certificates without sending signature requests to a third-party CA, first create a CA certificate with this interface and then create additional certificates that you sign with your CA: Step 1: Create a CA certificate.
  • Page 145 CradlePoint COR IBR1100/IBR1150 – Manual General Description Name: Choose a name meaningful to you. Issuer Set as CA certificate: Select if the certificate you are creating is intended to be a CA. Sign with CA certificate: Select to sign this certificate with a CA you created previously.
  • Page 146 CradlePoint COR IBR1100/IBR1150 – Manual Local Name: Generally the city or town Organization Name: Company name Organization Unit: Company division name Common Name: Must be unique; if used for authentication, this must match the configured Common Name (CN) on the third-party authenticator...
  • Page 147 CradlePoint COR IBR1100/IBR1150 – Manual Name: Friendly description of the certificate. Country: (C) The certificate owner’s country of residence. State or Province: (ST) the certificate owner’s state or province of residence Location: (L) The certificate issuer’s locality (city, town, etc.).

  • Page 148: Device Alerts

    NOTE: This article may contain links that direct you to non-CradlePoint, Inc. owned websites, and these links are not under the control of CradlePoint, Inc. or any of its representatives. CradlePoint, Inc. is not responsible for the content of any linked site or any link contained in a linked site or any changes or updates to such sites outside of cradlepoint.com.
  • Page 149 CradlePoint COR IBR1100/IBR1150 – Manual Alerts can be included for the following: Firmware Upgrade Available: A firmware update is available for this device. System Reboot Occurred: This router has rebooted. This depends on NTP being enabled and available to report the correct time.

  • Page 150: Gpio Connector

    CradlePoint COR IBR1100/IBR1150 – Manual Server Port: 587 (for TLS, or Transport Layer Security port; the router does not support SSL). Authentication Required: For Gmail, mark this checkbox. User Name: Your full email address Password: Your Gmail password From Address: Your email address To Address: Your email address Once you have filled in the information for the SMTP server, click on the “Verify SMTP Settings”...

  • Page 151: Enterprise Cloud Manager

    Enterprise Cloud Manager CradlePoint Enterprise Cloud Manager (ECM) is a cloud-based management service for configuring, monitoring, and organizing your CradlePoint routers. Key features include the following: Group based configuration management Health monitoring of router connectivity and data usage...

  • Page 152: Feature Licenses

    Maximum Alerts Buffer: The maximum number of alerts to buffer when offline. Feature Licenses Some CradlePoint features may require a license. These features are disabled by default. To obtain a feature license, contact your CradlePoint sales representative. 10/13/2014...

  • Page 153: Hotspot Services

    CradlePoint COR IBR1100/IBR1150 – Manual Once you have obtained the feature license file, upload the file to enable the feature. A reboot is required after uploading a feature license file. Hotspot Services Any of your networks can be enabled as a hotspot. To enable a hotspot, you need to select a network and set it as a hotspot in Network Settings → WiFi / Local Networks.
  • Page 154 CradlePoint COR IBR1100/IBR1150 – Manual Simple Mode Settings Display: This section allows you to choose if a "Terms of Use" page will be given to the user connecting to the hotspot. Internal Terms of Use. Fill in your own terms of use.

  • Page 155: Radius Settings

    CradlePoint COR IBR1100/IBR1150 – Manual RADIUS Settings Server Address 1: Assigned by RADIUS service. Server Address 2: This is an optional backup server. Authentication Port: The standard port number, 1812, will usually be sufficient. Accounting Port: The standard port number, 1813, will usually be sufficient.

  • Page 156: Serial Redirector

    CradlePoint COR IBR1100/IBR1150 – Manual The HeartBeat, when enabled, sends the following information to the specified URL at the specified time interval so the operator managing the hotspot knows if the router is still functioning: mac: The MAC address of the router, i.e. 00-11-22-33-44-55.
  • Page 157 CradlePoint COR IBR1100/IBR1150 – Manual Enabled: Enabling Telnet to Serial will start a Telnet server that passes its connection to the serial adapter. Enabling this service is not necessary when accessing serial through SSH. LAN: Enable serial redirector for LAN connections.

  • Page 158: Snmp Configuration

    SNMP, or Simple Network Management Protocol, is an Internet standard protocol for remote management. You might use this instead of Enterprise Cloud Manager if you want to remotely manage a set of routers that include both CradlePoint and non-CradlePoint products.

  • Page 159: System Information

    CradlePoint COR IBR1100/IBR1150 – Manual Authentication type: Select the authentication and encryption type that will be used when connecting to the router from the following dropdown list. These settings must match the configuration used on any SNMP clients. MD5 with no encryption...

  • Page 160: System Software

    CradlePoint COR IBR1100/IBR1150 – Manual Restore to Factory Defaults: This changes all settings back to their default values. Reboot The Device: This causes the router to restart. Advanced Control: System Automatic Reboot, Ping Test Scheduled Reboot: This causes the router to restart at a user-determined time.
  • Page 161 CradlePoint COR IBR1100/IBR1150 – Manual upgrade just because a new version is available. Check the firmware release notes (cradlepoint.com/firmware) for information to decide if you should upgrade. Current Firmware Version: Shows the number of the current firmware and the date it was updated.

This manual is also suitable for:

Cor ibr1100 seriesAer 2100

Table of Contents