Advertisement
4K RAW to Apple ProRes Recording
FS700 Configuration
1. SET UP THE FS700 FOR 4K TO 4K/UHD/2K/HD RECORDING
MENU » REC/OUT SET » REC SET » RAW SET
Select any of the following frames rates that you wish to record on the Odyssey:
*4K to 2K/HD Only
Once the selection is made you will need to press EXEC on the camera, to return to live /
record.
2. SETUP RECORD TRIGGER (FS700 REC BUTTON)
MENU » REC/OUT SET » VIDEO OUT » SDI/HDMI COMMAND » ON
3. SET GAMMA (REQUIRED FOR 4K/UHD/2K/HD RECORDING)
PICTURE PROFILE » PP7 » SETTING » GAMMA » S-LOG2
• Picture Profiles S-Log2, Rec709, Rec709 800% are all supported in this mode.*
• Custom Profiles or adjustments to the factory S-LOG2, Rec709, Rec709 800% are not supported
at this time.
• Be sure to set the white balance correctly before shooting. Also note that if you wish to trigger
the Odyssey via the camera's record trigger please set the following on the FS700
• With 4K to 4K/HD what you see on the monitor is what will be recorded.
• Adjusting settings within each picture profile will not be reflected in the recording since the
Odyssey can only detect which profile is set, not the individual attributes.
4. CONNECT FS700 TO THE ODYSSEY
Connect FS700 3G-SDI output to the Odyssey SDIA input
Use only 3G-SDI rated cables from FS700 to Odyssey. Using a 1.5G SDI cable in not recommended
and may cause issues.
Convergent-Design.com
4096x2096/24p
NTSC
4096x2096/30p
4096x2096/60p*
4096x2160/25p
PAL
4096x2160/50p*
NOTES:
NOTE:
[8]
Advertisement
