Nylatron Strips Replacement - Henny Penny OFE-290 Technical Manual

2-13. NYLATRON STRIPS
REPLACEMENT
2-15
1. Raise the lid and remove the retention ring from one end of the
lid pin.
2. Slide the lid pin from unit.
3. Lift the lid from unit.
4. Using a 3/8" socket, remove the nuts securing the rear shroud
and remove shroud.
5. Using a Phillip's-head screwdriver, remove the screws securing
the top cap and remove top cap.
6. Remove the bolts securing the nylatron strips to the weight
assembly and remove strips from weight assembly.
7. Using a Phillip's-head screwdriver, remove the screws securing
the front shroud.
Model 290
104