Cleaning Of The Housing And The Bean Hopper; Cleaning Of The Burrs - ECM S-Manuale 64 User Manual

Re-adjust the grind setting.
Grind a portion of beans and
throw them out.
Your grinder is operational
again.

6.2 Cleaning of the Housing and the Bean Hopper

Occasionally clean the housing and the tray with a damp cloth. You should clean the bean hopper with a damp cloth
prior to refilling the hopper in order to remove coffee oil residues. These residues can negatively effect the flavor.

6.3 Cleaning of the Burrs

• It is very tough to unscrew the burr bracket, due to the fine thread. There is a risk of injury.
• Please make sure no coffee grounds remain in the thread, since it will not be able to be screwed
together.
Close the bean hopper with
the lid and grind the
remaining beans still in the
hopper.
Unplug the grinder and
unscrew the safety screw of
the bean hopper.
Remove the bean hopper.
Please note that the hopper
latch has to be closed.
Loosen the screws of the
grinder scale with an Allen
wrench (2.5mm).
Remove the grinder scale.
Bedienungsanleitung/ Instruction manual 25