Diagnostic Tests And Input/Output Indicators - Bradford White Brute BNTH1000 Installation And Operation Instructions Manual

Page 110
237 Invalid DHW (Domestic Hot Water)
connector type setting
238 Invalid Stack connector type setting
239 Invalid Header connector type setting
240 Invalid Outdoor connector type setting
L 1. Return to Configuration mode and recheck
selected parameters, reverify and reset module.
2. If fault repeats, verify electrical grounding.
3. If fault repeats, replace module.
L 1. Return to Configuration mode and recheck
selected parameters, reverify and reset module.
2. If fault repeats, verify electrical grounding.
3. If fault repeats, replace module.
L 1. Return to Configuration mode and recheck
selected parameters, reverify and reset module.
2. If fault repeats, verify electrical grounding.
3. If fault repeats, replace module.
L 1. Return to Configuration mode and recheck
selected parameters, reverify and reset module.
2. If fault repeats, verify electrical grounding.
3. If fault repeats, replace module.
B W
RADFORD HITE