Asko T754C W Operating Instructions Manual page 23

Installation instructions
3. Secure the anti-tip device using the screws
as shown in the picture.
4. Attach the plastic cups for mounting the
tumble dryer's front feet to the washing
machine's top cover. This is essential, as
only when the tumble dryer's feet are resting
in the plastic cups can you be sure that the
tumble dryer is correctly positioned on the
washing machine. Break off tab A on the cup
fi tted on the right side and tab B on the cup
fi tted on the left side. Then remove the paper
from the self-adhesive surface under the
plastic cups.
A
B
5. Fit the plastic cups so that the "tags" marked
with arrows are against the front edge or side
edge of the cover and press them fi rmly onto
the cover. Then break off the remaining tabs.
6. Push the tumble dryer in under the metal
brackets. At the same time keep the front
edge raised by 7/16" (10mm) to 7/8" (20mm) .
7. Lower the tumble dryer's front feet into the
plastic cups and adjust the tumble dryer to
ensure it is level.
Adjusting the feet
Screw the feet in or out so that the tumble dryer
is both stable and level.
Customer Care Center
1-800-898-1879
www.askona.com
23