Set Up A Wireless Network - ZyXEL Communications HC-WXF990 Quick Start Manual

3. Congratulations. Open a web browser, such as Internet Explorer, to
visit your favorite website.
If you cannot access the Internet when your computer is
connected to one of the NBG-460N's LAN ports, check your
connections. Then turn the NBG-460N off, wait for a few
seconds and turn it back on. If this doesn't work run the
wizard again, making sure you type the information correctly.
Also, if you are using a new Internet account, contact your
ISP to make sure it is active. See Troubleshooting in the
User's Guide for more suggestions.

Set Up a Wireless Network

You can use Wi-Fi Protected Setup (WPS) to add wireless devices to
your wireless network. The other wireless devices must also support
WPS.
If your wireless devices display the WPS logo as
shown, go to section
with WPS to use WPS to set up your wireless
network.
If your wireless devices do not display the WPS logo, go to section
up a Wireless Network Manually
Set up Your Wireless Network with WPS
Follow these steps to set up your wireless network using WPS.
1. Place a WPS-enabled device within range of the NBG-460N.
16
Set up Your Wireless Network
to manually set up a wireless network.
Set