ZyXEL Communications HC-WXF990 Quick Start Manual page 17

2. Press the WPS button on both devices. It doesn't matter which button
is pressed first. You must press the second button within two minutes
of pressing the first one.
Your NBG-460N has a WPS button located on its housing, as well as a
WPS button available in the web configurator used to manage the NBG-
460N. Other WPS-enabled devices should have at least one similar
WPS button.
3. The WPS LED (
shines steadily.
4. Check if your devices are connected by trying to connect to the
Internet using the device you connected to the NBG-460N. If you can
do this, then your WPS connection is successful.
2 minutes
) on the NBG-460N blinks for a few seconds, then
ENGLISH
17