ZyXEL Communications HC-WXF990 Quick Start Manual page 6

Do the following to make hardware connections for initial setup.
1
Antennas
Connect each antenna to an antenna socket, ensuring the
antennas are screwed in firmly and angled upwards.
2
LAN
Connect the Ethernet port on your computer to a LAN port on the
NBG-460N using the included Ethernet cable.
3
WAN
Connect the WAN port on your NBG-460N to the Ethernet port
on the device with which you are accessing the Internet (for
example, a router or modem) using an Ethernet cable.
4
POWER Connection
Use the power adapter from the package to connect the
POWER socket to an appropriate power source.
The LEDs
Look at the LEDs (lights). When you connect the power, the power LED (
) blinks and stays on once the device is ready.
The LAN (
corresponding connections are properly made.
6
) and WAN ( ) LEDs turn on if the