5
After Installing this product
1. Reconnecting the battery.
First, double-check that all connections are correct and that this product is installed cor-
the negative (–) cable to the negative (–) terminal of the battery.
2. Start the engine.
3. Press the RESET button on this product.
Press the RESET button on this product using a pointed object such as the tip of a pen.
4. Enter the following settings:
1
2 Make any necessary installation angle adjustments.
4 Set the time and language.
After installing this product, be sure to check in a safe place, that the vehicle is per-
forming normally.
5
6
AVIC-D1/UC
6
7
7
8
A
B
C
D
E
F
275
8