Pioneer avic-d1 Service Manual page 188

1
A
B
No. Inspection item
1 Change to
display error
2 Start within
debug shell
C
3 Program
loading
D
4 GPS
assessment
E
5 File
maintenance
6 Program forced
write
F
188
1
2
TESTMODE MENU [SERVICE_MENU(THCHNICAL)]
1. Change to display error
2. Start within debug shell
3. Program loading
4. GPS assessment
5. File maintenance
6. Program forced write
<== back page
SYSTEM Ver. : [BOOT] 0.14 [OS] 0.14
Outline of inspection
Switching of error
information display
Switching of debug
shell start
Switching of program
loading
GPS assessment system
start
File maintenance
function
Program forced write
AVIC-D1/UC
2
3
[Message]
[On]
[Disc & Card]
==> next page
Content if inspection
Display setting for error cases. (for debugging)
Message/Information (error information) selectable.
Setting for debug shell start. (for debugging)
Off (no initial start)/On (initial start) selectable.
Recognition method for boot up program write is
changed.
System
program
System data
Disc
(default)
GPS program
Application
program
System
program
System data
Disc & Card
(for debug)
GPS program
Application
program
GPS assessment system can be used. The system will
return to "menu" by BACK key.
File maintenance operations are made. Formatting of
SRAM drive and PC card (ATA Flash Card) are made.
SRAM data is retrieved and copied to PC card. Data
retrieved from SRAM is copied to SRAM from PC card.
Rewriting of SYS (system), GPS (GPS) and APL
(application) software are done by force.
(Joystick is used) The system will return to "menu" by
BACK key.
3
4
Write when the version
No. in the disc is
higher.
Write when the version
No. in the disc is
higher.
Write when the version
No. in the disc is
higher.
Write when the version
information is different
from the one in disc.
Write when the version
No. in disc or card is
higher.
Write when the version
No. in disc or card is
higher.
Write when the version
No. in disc or card is
higher.
Write when the version
No. in disc or card is
higher.
4