Pioneer avic-d1 Service Manual page 260

1
2. FLAP Operation Specification
(1) Reset Start
A
• No operation at full open position. It moves to the closed position at positions other than full open.
(2) ACC ON
• No operation at full open or closed position.
• At ANGLE/half open position, it closes once and then returns to the LAST position.
(3) ACC OFF
• No operation at closed position.
• It closes in 3 seconds when it is at positions other than closed.
However, it shifts to standby status when DISC is at half position.
• If it is in FLAP operation, it closes after completing the current operation.
B
(4) ACC OFF/ON
• If ACC ON is detected within 3 seconds after ACC OFF, the current condition is continued.
• DISC is at half position, it is closed after loading.
* "ACC detection" here includes chatter period.
That is, "ACC detection within 3 seconds" means 2.5 seconds + chatter period 0.5 seconds, and the actual
ACC OFF/ON interval is "within 2.5 seconds."
(5) DISC Insertion
• When DISC is inserted for either CD or DVD, it restores to the LAST position.
C
(6) ANGLE Key
• Angle is adjusted in 5 steps from FULL CLOSE (0°) to the maximum angle (approx. 20°) (1STEP slides in horizontal
direction by approx. 6mm).
• It is closed when the system is at the maximum angle.
• Though continuous operation is executed by pressing the key for more than 1 second, it stops when the maximum
angle is reached.
• If the opening exceeds the maximum angle, ANGLE key operation becomes disabled.
(7) Pressing OPEN key quickly
• If the system is at FULL CLOSE/ANGLE position, it opens to the half open position (CD insertion opening position) in
1 action.
• If it is at half open position, it restores the LAST position.
D
• If it is at half open position and DISC at half position, it restores the LAST position after reloading.
• CD EJECT key becomes enabled at the opening of half open position or later by this operation.
(8) OPEN Key Pressed for 2 Second or Longer
• If FLAP angle is at positions other than full open, it moves to full open position.
• DVD EJECT key becomes enabled only at the full open position by this operation.
(9) Obstructions
a. During CLOSE operation
• It opens to 45° if the angle at which operation was disabled was less than 45°.
• It shifts to the open direction by 1 angle if the angle at which operation was disabled was 45° or larger.
b. During OPEN operation
E
• It shifts to the close direction by 1 angle from the angle at which operation was disabled.
F
260
1
2
AVIC-D1/UC
2
3
3
4
4