Pioneer avic-d1 Service Manual page 219

5
16. Device Check
• The device inspection above is performed only for engineering.
• (Device selection)
Select a device with the [ ] and [ ] keys on the main unit, and decide with the [CR] key.
• (Pattern selection)
Select a pattern with the [ ] and [ ] keys on the main unit, and start the inspection with the [CR] key.
* Only when ASIC is selected, the bit shift pattern can be selected.
Return to the device selection screen with the [RETURN] key on the main unit.
• (During the inspection)
Stop the inspection with the [RETURN] key on the main unit, and return to the device selection screen.
17. All memory clear (for Service)
• SRAM (application domain) is cleared.
• FLASH (application domain) is cleared.
• If SRAM clear is not successful, FLASH will not be cleared.
• After the inspection screen is displayed, the above process is executed by the [NAVI] key on the remote
controller.
• The result of the process is displayed.
5
6
16. Device Check
1. SDRAM (0X48000000 - 0X4BFFFFFF)
2. SRAM (0X42000000 - 0X4203FFFF)
3. ASIC (0X43000270 - 0X43000274)
4. ALL Device
[return] It returns to a menu screen.
17. All memory clear (for Service)
The clearance of SRAM (application domain)
The clearance of FLASH (application domain)
[NAVI] Inspection is performed.
[return] It returns to a menu screen.
6
7
AVIC-D1/UC
7
8
A
B
C
D
E
F
219
8