Audio Delay - Denon AVR-1911 Owner's Manual

Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® " setting (vpage 51) is "Manual".
Setting items
q Select the speaker tone adjustment method.
Adjust CH
Correct the tone of each
All CH : Adjust the tone of all speakers together.
speaker. L/R CH : Adjust the tone of left and right speakers together.
Each CH : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Base Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ.
"Base Curve Copy" is displayed after Audyssey Auto Setup has been
performed.
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
settings.
Remote control operation
buttons
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
RESTORER
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
OFF : Do not use RESTORER.
Mode 1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.
Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.
• This item can be set with analog signals or when a PCM signal (fs = 44.1/48
kHz) is input.
• This cannot be set when the surround mode is set to "DIRECT" or "PURE
DIRECT".
• This item default setting for "iPod" and "USB/iPod" is "Mode 3". All others are
set to "OFF".
• When set to something other than "OFF",
RESTORER
• Pressing on the remote control unit or the main unit makes this
setting.
OFF Mode 1
(RESTORER 64)
Mode 3
(RESTORER HQ)

Audio Delay

While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" is set to "ON" and when
a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode" (vpage 47) is set to "Game".
Confirm the setting
Setting details
is displayed.
Mode 2
(RESTORER 96)
Default settings are underlined.
Setting details
Return to previous menu
ENGLISH
Audio Adjust
53