Denon AVR-1911 Owner's Manual page 53

ENGLISH
Audio Adjust
Setting items
Panorama ON : Set.
Assign front L/R signal also OFF : Do not set.
to surround channels for
wider sound.
Dimension 0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
Center Width 0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
Delay Time 0ms – 300ms (30ms)
Adjust delay time to control
sound stage size.
Effect Lev. 1 – 15 (10)
Adjust effect signal level.
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Room Size Small : Simulate acoustics of a small room.
Determine size of acoustic Medium-S : Simulate acoustics of a medium-small room.
environment. Medium : Simulate acoustics of a medium room.
Medium-L : Simulate acoustics of a medium-large room.
Large : Simulate acoustics of a large room.
NOTE
"Room Size" does not indicate the size of the room in which sources are
played.
AFDM ON : Set.
(Auto flag detect mode) OFF : Do not set.
Detect the source's
[Example] Playing Dolby Digital software (with EX flag)
surround back channel
• When "AFDM" is set to "ON", the surround mode is automatically set
signal and set the
to the DOLBY D + PLgx C mode.
optimum surround mode
• To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and
automatically.
"Surround Parameter" – "S.Back" to "MTRX ON".
Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when "AFDM" is set to
"ON", set "Surround Parameter" – "S.Back" to "MTRX ON" or
"PLgx CINEMA".
50
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
n For 2-channel sources
S.Back
Sets the method of
ON : The surround back channel is used.
generating of the surround
OFF : No signal is played from the surround back channels.
back channel.
n For Multi-channel sources
Set the decoding method for the surround back channel.
DSCRT ON : Play the surround back signals included in the 7.1-channel
source.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
z1
ES MTRX
surround channel signals of the DTS source.
ES DSCRT
6.1-channel DTS source.
PLgx CINEMA
decoding the signals in the Dolby Pro Logic gx Cinema mode.
PLgx MUSIC : Generate and play the surround back signals by
decoding the signals in the Dolby Pro Logic gx Music mode.
OFF : Do not play the surround back channel.
z1 This can be selected when playing DTS sources.
z2 This can be selected when playing DTS sources including a signal to
identify discrete 6.1-channel signals.
z3 This can be selected when "Speaker Config." – "S.Back" (vpage 55)
is set to "2sp".
• This can also be set by pressing
• If the source being played contains a surround
back signal, the decoder type is automatically
selected by the AFDM function. Set "AFDM" to
"OFF" to switch to your preferred decoder.
NOTE
If the setting in "Speaker Config." – "S.Back" (vpage 55) is "None",
"S.Back" is not displayed.
Front Height ON : Audio is output from the front height speaker.
Determine whether to use OFF : Audio is not output from the front height speaker.
front height channel.
NOTE
• "Front Height" is displayed with the settings listed below.
• When "Amp Assign" (vpage 54) is set to "Front Height".
• When the "Speaker Config." – "Front Height" setting (vpage 55) is
set to other than "None".
• "Front Height" cannot be set if the HD Audio source being played
includes a front height channel. In this case, the Front height channel
is played back without decoding in PLgz mode, using the input signal.
Confirm the setting
Setting details
: Generate and play the surround back signals from the
z2
: Play the surround back signals included in the
z3
: Generate and play the surround back signals by
STANDARD
.
Return to previous menu