Temporary Overrides - Danfoss TS715 Installation & User's Instructions

Temporary override buttons
Sometimes you may need to change the way you use
your heating temporarily, i.e. due to unusually cold
weather. The TS715 has two convenient overrides which
can be selected without affecting the set programme.
+1HR
MAN
+1HR = pressing this button when the unit is in AUTO
MAN = pressing this button when the unit is in AUTO or
20
+1HR
MAN
or ALLDAY mode will cause the system to
remain on for an extra hour. If it is pressed
while the unit is OFF, the system will come on
immediately for 1 hour then go off again.
ALLDAY mode will cause the system to go OFF
until the next programmed ON, or vice versa.