Danfoss TS715 Installation & User's Instructions page 14

Programming the heating & hot
water in 5/2 day mode
1. Press PROG until SET
ON TIME appears at the
top of the display and
MOTUWETHFR appears at
the bottom of the display.
Use the + and - buttons to
set the time you would like
your system to fi rst come
on in the morning (Event 1).
2. Press NEXT ON/OFF once
only.
Use the + and - buttons to
set the time you want your
system to go off (Event 2).
To move to the next setting,
i.e. when you would like
your system to come on
again (Event 3) press the
NEXT ON/OFF button
again.
3. Continue programming the
central heating & hot water
system ON and OFF times
for weekday Events 4, 5 & 6
as in Step 2.
14