Before You Start - Danfoss TS715 Installation & User's Instructions

Before you start

Open the fl ap on the front of the clock. Press the RESET
button using a non-metallic object (e.g. pencil/matchstick)
until you hear a click and the red light on the front of the
unit fl ashes once.
This will reinstate the preset
programmes and sets the time to
12.00pm on Monday (MO)
Choice of 24hr or AM/PM display
Press and hold DAY & NEXT
ON/OFF for 1.5 seconds to toggle
between 24hr clock and AM/PM
display, as required.
Setting the correct Time and Day
SETTING THE TIME
Press PROG once.
The words SET TIME will appear
at the top of the display & the time
will fl ash on and off.
Use the + and - buttons to set
the correct time (press and hold to
change in 10 min increments).
11