Danfoss TS715 Installation & User's Instructions page 16

Programming the heating & hot
water in 7 day mode
1. Press PROG until SET
ON TIME appears at the
top of the display and MO
appears at the bottom of
the display.
Use the + and - buttons to
set the time you want your
system to fi rst come on in
the morning (Event 1).
2. Press NEXT ON/OFF to
move to Event 2.
Continue programming
the system ON and OFF
times in this way by using
the + and - buttons to
set the time you want
and pressing the NEXT
ON/OFF button to move
to the next setting.
3. Press DAY button once
only. TU will appear at the
bottom of the display.
16