Sound Setting; Setting The Subwoofer Level; Setting The Bass Control; Setting The Bass Center Frequency - Alpine cda-9886 Quick Reference Manual

Sound Setting
Setting the Subwoofer Level
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
SOURCEI<!> Rotary ancoder (AUDIO-LOUD)
BAND
Q" lENT
~IESC
SOUND SETUP
You can change the Subwoofer Level to create your own tonai
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the SUBW. Level
Adjustment mode, and then press Q"/ENT.
SUBW Level-
J
H
Bass- z
H
Treble- z
H
HPF- z
H
Black Out
H
SUBW Level
3
Turn the Rotary encoder to select the desired
subwoofer level (0-+15).
• Ifno operation is performedfor 15 seconds, the unit will return to
normal mode automatically.
_J
When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to "Turning Subwoofer ON/OFF" (page 16).
The adjustment can also be made by pressing
Rotary
encoder
(AUDIO). Refer to "Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat" (page 14).
.z
The function is inoperable when DEFEAT is set to ON.
1
Press Rotary encoder (AUDIO) repeatedly to
choose the desired mode.
Each press changes the mode as follows:
SUBWOOFER- ~ BASS ~ TREBLE ~ BALANCE ~ FADER
~
DEFEAT
~
VOLUME
~
SUBWOOFER
Subwoofer level:
a -
+ 15
Bass level: -7 - +7
Treble level: -7 - +7
Balance: U5 - R15
Fader: R15 - F15
Defeat: ON/OFF
Volume:
a -
35
• If no operation is performed for 5 seconds after selecting the
SUB WOOFER, BASS, TREBLE, BALANCE, FADER, VOLUME or
DEFEAT mode, the unit automatically returns to normal mode.
- When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to "Turning Subwoofer ON/OFF" (page 16).
2
Turn the Rotary encoder until the desired sound Is
obtained In each mode.
By setting Defeat ON, previously adjusted settings of BASS
and TREBLE will return to the factory defaults.
• Depending on the connected devices, some functions and display
indications do not work.
14-EN
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the Bass
Adjustment mode, and then press Q"/ENT.
SUBW Level-
J
H
Bass-
4 H
Treble-
4 H
HPF-
4
H
Black Out
H
SUBW Level
3-1 Press BAND to select the desired bass center
frequency.
80 Hz ~ 100 Hz ~ 200 Hz ~ 60 Hz ~ 80 Hz
Emphasizes lhe displayed bass frequency ranges.
3-2
Press SOURCE/<!> to select the desired bass
bandwidth.
GNa~:W)~
....
~~
.....
~
.....
~~
.....
~-) (~~e)~
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the center frequency. A narrower setting will
boost only frequencies near the center frequency.
Sound Setting
Setting the Subwoofer Level
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
SOURCEI<!> Rotary ancoder (AUDIO-LOUD)
BAND
Q" lENT
~IESC
SOUND SETUP
You can change the Subwoofer Level to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the SUBW. Level
Adjustment mode, and then press Q"/ENT.
SUBW Level-
J
H
Bass- z
H
Treble- z
H
HPF- z
H
Black Out
H
SUBW Level
3
Turn the Rotary encoder to select the desired
subwoofer level (0-+15).
• Ifno operation is performedfor 15 seconds, the unit will return to
normal mode automatically.
_J
When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to "Turning Subwoofer ON/OFF" (page 16).
The adjustment can also be made by pressing
Rotary
encoder
(AUDIO). Refer to "Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)lFader (Between Front and
Rear)lDefeat" (page 14).
.z
The function is inoperable when DEFEAT is set to ON.
1
Press Rotary encoder (AUDIO) repeatedly to
choose the desired mode.
Each press changes the mode as follows:
SUBWOOFER- ~ BASS ~ TREBLE ~ BALANCE ~ FADER
~
DEFEAT
~
VOLUME
~
SUBWOOFER
Subwoofer level:
a -
+ 15
Bass level: -7 - +7
Treble level: -7 - +7
Balance: U5 - R15
Fader: R15 - F15
Defeat: ON/OFF
Volume:
a -
35
• If no operation is performed for 5 seconds after selecting the
SUB WOOFER, BASS, TREBLE, BALANCE, FADER, VOLUME or
DEFEAT mode, the unit automatically returns to normal mode.
- When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to "Turning Subwoofer ON/OFF" (page 16).
2
Turn the Rotary encoder until the desired sound Is
obtained In each mode.
By setting Defeat ON, previously adjusted settings of BASS
and TREBLE will return to the factory defaults.
• Depending on the connected devices, some functions and display
indications do not work.
14-EN
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the Bass
Adjustment mode, and then press Q"/ENT.
SUBW Level-
J
H
Bass-
4 H
Treble-
4 H
HPF-
4
H
Black Out
H
SUBW Level
3-1 Press BAND to select the desired bass center
frequency.
80 Hz ~ 100 Hz ~ 200 Hz ~ 60 Hz ~ 80 Hz
Emphasizes lhe displayed bass frequency ranges.
3-2
Press SOURCE/<!> to select the desired bass
bandwidth.
GNa~:W)~
....
~~
.....
~
.....
~~
.....
~-) (~~e)~
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the center frequency. A narrower setting will
boost only frequencies near the center frequency.