Setting Defeat; Setting Key Sound - Alpine INE-W970A Owner's Manual

1. In the Setup screen, touch [Time Correction].
2. Touch the Correction Mode button and select the mode.
Each time the button is pressed, mode is changed from ms, inch and
cm.
3. Touch [ - ] or [ + ] for each speaker to adjust the time or
distance.
0.0 msec to 9.9 msec (0.1 msec/step)
0.0 cm (0.0 inch) to 336.6 cm (132.7 inch) (3.4 cm/step)
All speaker setting values are adjustable in the range of 15 ms or
510 cm.
4. To store the adjusted setting value, touch and hold [Preset 1],
[Preset 2], or [Preset 3] for at least 2 seconds.
• Touch [Flat] to set all values to 0.0.
• If the Subwoofer setting is "Off," the Subwoofer setting cannot be
edited.
Calling the Time Correction Value
Calling the pre-set time correction value.
Touch [Preset 1], [Preset 2], or [Preset 3] on the time correction
screen.
The setting stored in the Preset will be recalled.
68
-EN

Setting Defeat

Defeat is "On," MX HD and Equalizer Presets features are turned off.
This disables any settings made for these functions.
Check the [Off] box to turn the feature on.
Uncheck the [On] box to turn the feature off.

Setting Key Sound

You can change the volume of the sound heard when a button is
touched.
Adjust the sound level from 0 to 6.