About Display - Navman Tracker 5380 Installation And Operation Manual

A routes file: The new routes are added to
any existing routes in the TRACKER. If a new
route has the same name as an existing
route but has different data then the
TRACKER asks which route to keep.
A track file: The new track will replace the
existing track in the TRACKER.
To load a file to the TRACKER:
1 Select the file to load.
2 Press and select Load.
Deleting a file from the user card
1 Select the file to delete.
2 Press and select Delete.
3 Select Yes to confirm.
Reading the file information
This reads the file names from the user card
and displays them. Reading does not load any
file data into the TRACKER.
1 Press and select Card.
2 Select Read.

13 About display

TRACKER 5380 Installation and Operation Manual
Formatting the user card
Formatting prepares a user card for use. Format
the card if there is an error message saying that the
card is not formatted. Any data files on the card
are deleted.
1 Press
2 Select Format.
3 Select Yes to confirm.
Sorting the file names
This sorts the displayed file names.
1 Press
2 Select sort by Name, Type or Time.
To show the about display, press
Other, then select About.
The about display shows:
The software version and date.
The world chart version.
Any card fitted.
The number of waypoints, routes and
tracks in the TRACKER.
Wiring information for the TRACKER
connectors.
In the unlikely event of having to contact a
NAVMAN dealer for service, quote the software
version number and date.
NAVMAN
and select Card.
and select Sort.
, select
37