Using The Menus; Turning On And Off / Auto Power - Navman Tracker 5380 Installation And Operation Manual

2-2 Using the menus

Operate the TRACKER by selecting items from
menus. Items can be submenus, commands
or data.
Selecting a submenu
A after a menu item indicates a submenu, for
example Chart . Press
the highlight to the submenu, then press
Starting a command
Press or to move the highlight to the
command, for example Goto cursor, then press
.
Changing data
First press or to move the highlight to the
data to change, then:
a) To change a tick box
means On or Yes
means Off or No.
Press or
b) To select an option
1 Press to display the menu of options.
2 Press or to move the highlight to the
option you want, then press

2-3 Turning on and off / auto power

Turning on manually
If the TRACKER is not wired for auto power,
press to turn the unit on. If necessary, adjust
the display to be easy to read (see section 2-4).
Note: If the TRACKER is not wired for auto
power then the TRACKER does not record
engine hours and might not record fuel
consumption (see section 15-4).
Turning off manually
If the TRACKER is not wired for auto power or
if the ignition switch is off, hold down
the display turns off.
10
or to move
to change the tick box.
.
c) To change a name or number:
.
1 Press
2 Press
change. Press
or digit.
Repeat this to change other letters or
numbers.
3 Press
press
d) To change a slider value
Press
the value.
Auto power
If the TRACKER is wired for auto power (see
section 15-4), then:
The TRACKER automatically turns on when
you turn the boat's ignition switch on.
You can not turn the TRACKER off while the
ignition switch is on.
If Auto power off (see section 14-1)
is
when you turn the boat's ignition switch
off.
until
If Auto power off (see section 14-1)
is
the boat's ignition switch off. You can now
turn the TRACKER off manually.
NAVMAN TRACKER 5380 Installation and Operation Manual
to display the name or number:
or to select a letter or digit to
or to change the letter
to accept the new value. Or
to ignore the changes.
to decrease the value or
, the TRACKER automatically turns off
, the TRACKER stays on when you turn
to increase