Simulate Mode; The Main Displays - Navman Tracker 5380 Installation And Operation Manual

2-7 Simulate mode

In Simulate mode, the TRACKER ignores data
from the GPS antenna and other transducers
and sensors and the TRACKER generates this
data itself. Otherwise, the TRACKER functions
normally.
There are two simulate modes:
Normal: Allows a user to become familiar
with the TRACKER off the water.

2-8 The main displays

To go to a display, press
to select the type of display to show, press
or to select the display from the list, then
press .
Chart menu and displays
SmartCraft menu and displays
The SmartCraft displays require a SmartCraft
system to be installed. For information on
using SmartCraft, see the SmartCraft Gateway
Installation and Operation Manual.
12
, press or
NAVMAN
Demo: Simulates a boat moving along
a route and automatically displays different
TRACKER functions.
To start and stop Simulate mode, and for more
information, see section 14-12. In simulate
mode, Simulate or Demo flashes at the
bottom of the display.
Warning: Never have Simulate mode on
when the TRACKER is navigating on the water.
The available displays depend on the optional
sensors and instruments that are installed (see
section 1-1).
TRACKER 5380 Installation and Operation Manual