Ps/2 - National Instruments PXI-8184 User Manual

PS/2

Pin Signal Name
1 DATA
2 NC
3 GND
4 +5V
5 CLK
6 NC
© National Instruments Corporation
Figure 3-7 shows the location and pinouts for the PS/2 connector on the
NI PXI-8184/8185. Table 3-7 lists and describes the PS/2 connector
signals.
To connect both a PS/2 keyboard and PS/2 mouse to the NI PXI-8184/8185,
use the Y-splitter adapter cable included with your controller (refer to
Figure 4-1, Y-Splitter
Replacement Y-splitter cables are available from National Instruments,
part number 778713-01.
Figure 3-7. PS/2 Connector Location and Pinout
Table 3-7. PS/2 Connector Signals
Signal Description
Data Keyboard
Data Mouse
Ground
+5 V
Clock Keyboard
Clock Mouse
Cable).
Y-Splitter
Keyboard
Data Keyboard
NC
GND
+ 5
Clock Keyboard
NC
3-9
Chapter 3 I/O Information
3
5
1
PS/2
2
6
4
Y-Splitter
Mouse
Data Mouse
NC
GND
+ 5
Clock Mouse
NC
NI PXI-8184/8185 User Manual